Our friends at Dell sent over their new Inspiron Zino HD PC and I must say that this little Inspiron really inspired me.  This box has the potential to be a great solution as a small form factor (SFF) HTPC as well as a very capable desktop computer for those that have limited work spaces. I would like to apologize in advance for the length of this particular blog post, but I wanted to make sure I provided an accurate write up.

Per my usual comments, this is not intended to be an official review of the device, but more of an overview of the platform and features offered, mixed with a little user feedback.  Let me dive into some of the specifications first and then share a little on my experience with this computer.

Size
The first thing I noticed when I pulled the Inspiron Zino HD out of the box was small size.  Measuring  a mere 7  3/4 inches on each side and only 3 1/2 inches tall (approximately), this is a really small PC.  I snapped a couple of pictures to give you some references for comparison (see below).  After removing the protective packaging, it was very pleasing to the eye.  The overall shape, fit and finish are beautiful –not something I often say about a PC.  The unit has a mirror black piano finish.  

As you can see, it is similar in size to a baseball cap–now that is pretty small.  I also snapped a picture of it sitting next to the Lian Li C39 chassis (a low profile HTPC chassis).

Specs
Dell is offering the Inspiron Zino HD PC with multiple configurable options so customers have the ability to personalize the platform to a specific need or budget.  The particular unit sent to me was configured with the following specifications:

Performance 
At the heart of this little beast is the AMD RS780G chipset and the AMD Athlon™ X2 3250e processor.  Combined, these two pieces of technology deliver a very compelling experience in both processing and graphics power.  Capable of handling excellent HD playback (when combined with an HD monitor), online streamed content and more, this unit delivers a great entertainment experience.  While I did not run any benchmark utilities, I was impressed by the variety of applications and content the platform supported. 

Do note though, none of my testing was done under rigorous lab conditions with repeated and averaged test results nor am I showing pretty graphs and charts.  My testing was strictly limited to putting it in a real world environment and observing the results.  See the User Experience section below for more details.  I would also like to point out that this unit is not intended to be a high performance gaming system but neither is it an entry level nettop type platform.  This is a solid performing, mainstream PC that offers a full PC experience for a variety of uses.

Optional Configurations
As mentioned above, this unit is configurable with many upgrade options.  For example, you want a larger HDD? You can get up to a 1TB HDD installed.  Higher end graphics? Yep, order an ATI Mobility Radeon™ HD 4330 GPU and you have one powerful little work horse.  Here is a list of upgrade options:

CPU: Up to an AMD Athlon™ Neo X2 6850e processor
Graphics: Optional ATI Mobility Radeon™ HD 4330 GPU
Memory: Up to 8GB of DDR2 800
HDD: Up to 1TB
ODD: DVD or Blu-ray drive option available
Wireless: Optional 802.11 b, g, or n
Colors: 9 color lid options to choose from (see below)
OS Options:
Windows® Vista Home Basic 32bit
Windows® 7 Home Premium 64Bit
Windows® 7 Professional 64Bit
Windows® 7 Ultimate 64Bit

Pricing and Availability
According to my friends at Dell, the Inspiron Zino HD will start at $229 for the base configuration (AMD Athlon™ 2650e processor, 2GB RAM, 250GB HDD, 8X DVD drive, Windows Vista Basic). Yes, you read that correctly, $229! This is an incredible starting price point for such a capable system in such a small form factor. Dell also told me that the unit will be available both online and through retail outlets.  Units are available online today from Dell but expect a month or two (typical retail stocking times) before systems will be available on store shelves.  Prices are in USD, see your local Dell.com site for regional pricing.

User Experience
My initial goal was to test this as a great, small form factor HTPC.  As such, I spent a good deal of time testing the box in a home theater environment. And it did most things very well.

From the moment I opened up the packaging, and powered it up, the process was smooth and user friendly.  The device immediately went through the set up process without any hiccups.  I was able to easily set up the user accounts and Media Center.  Once everything was completed, I decided to install additional software to open up the experience a little, like Hulu’s Desktop application and Arcsoft’s Total Media Theater. 

I wanted to test Blu-ray playback but since my unit did not have a Blu-ray player installed, I was unable to test that functionality. 

Playing Content-
Once all that was done, the fun really began. I first played a couple of different DVDs to evaluate playback quality.  I was not disappointed.  With a handful of DVDs, some more intensive than others, the system played them all back smoothly without dropping frames thanks in part to AMD’s UVD hardware acceleration technology.   

Next I loaded up some Hulu content via both the Hulu website and their Desktop application.  With the latest Flash player from Adobe, the system did pretty well.  I played content from both Hulu’s website and using their Hulu DT application. Both versions played very well. In addition to the Hulu content, I tried the new Internet TV functions integrated into Media Center. After updating the flash player plug in for Media Center, again, content played back smooth and without issues.   Not wanting to limit the experience to Hulu or Media Center, I also tried content directly from ABC’s website, again smooth playback.  Lastly, I tried content from YouTube with great success as well.  Now this mix certainly does not reflect all the different websites and content that exists, but I think it does provide some idea of what you might expect.

When placing your order, it should be noted that the current version of Flash player does not take advantage of the hardware acceleration via the graphics chip. Therefore, flash playback is very CPU intensive and the more robust or faster the processor, the smoother the playback (assuming you are not limited by your internet connection).  Likewise, if a future version of Adobe’s Flash player supports hardware acceleration, playback of Flash content should be even better.

Thanks to my coworkers in Canada, I managed to get my hands on a new USB TV Tuner (based upon the ATI Theater™ HD 750 tuner) and connect it to the Zino HD.  Windows® 7 immediately recognized the tuner and installed the appropriate drivers.  After a quick set up in Media Center, I was able to watch live and DVR local broadcast content in HD (using my HD capable monitor) without any issues.  Playback of both live and recorded TV content was clear, smooth and stutter free.  Signal strength was good but of course that is highly dependent on terrain, distance from towers, etc. but needless to say, it was a pleasant experience with the ATI Theater HD 750- based TV tuner and the Zino HD combination.    

Now, I did run into a stuttering issue playing back recorded TV over the wireless N network. However, I don’t believe this to be an issue with the Dell hardware because when I watch the same content live or recorded locally on the HDD it plays back just fine. Likewise, if I pause the streamed recorded TV content being played back, it will play fine for a while before it starts stuttering again.  Therefore, this would appear to be something limiting on my wireless network.  Unfortunately, I did not have enough time to debug the issue at the time of this posting.

Integrated Wireless-
The integrated wireless N adapter worked exceptionally well. I had full bars and it worked even better than my USB wireless N adapter that I normally use for my bedroom HTPC. The Windows® 7 Home Group functionality makes adding systems and sharing content very easy. With a couple of quick clicks, I was able to see the media on my main HTPC without issue. Movies streamed from my main HTPC played back very well– again no dropped frames and the picture quality looked excellent. Likewise, music and pictures were also easily streamed from the main HTPC to the Inspiron Zino HD without issue.  Therefore, other than the minor issue with recorded TV content, streaming over the network was very solid and smooth.

Storing CDs to drive-
I also decided to load some music content on the local drive so I popped in a couple of CDs to see how well the system was able to convert music in different formats. The results were quick and again, local and remote content played back smoothly.  Speaking of storage, the device does have 2 eSATA ports so external storage can be easily added if you run out of space on the HDD.

Power Draw-
After bringing the unit back to work, I connected it up to a Kill-A-Watt meter to see how the power draw was going to be on this machine.  Now, power draw did vary as expected based upon different use cases (DVD, streaming internet content, etc.).  At idle (staring at the desktop), the system was using a mere 29W.  When I streamed content from Hulu (via Hulu DT), the system was drawing about 40W while DVD playback was about 37W.  With such low power operation, no high speed fans were necessary to keep this unit cool, bringing me to my next topic — noise levels.

Noise Level-
While I did not have a noise meter handy, it is worth noting that under all these circumstances, the box remained very quiet.  Even in the quietest of rooms, the system is only barely perceptible.  In most cases, I needed to put my ear within a few inches of the PC to hear it.  I even left it on overnight in my bedroom and it was only noticeable if you were listening for it.  Dell did an excellent job of keeping this PC almost silent.

For me, this computer makes for an excellent small form factor HTPC.  However I think it would be equally at home for college students in a dorm room for example that have little desk space and need a system to function both as a PC and an entertainment device.  Likewise, this could make for a great kitchen PC, where you might want to have a PC nearby when cooking, looking up web recipes, and more.  This unit could also function as a kid’s PC where you might not need high end gaming performance but want something small and quiet. 

I am hoping to get my hands on the version that has the Blu-ray drive and the ATI Mobility Radeon™ HD 4330 GPU in the near future.  If I do, I will certainly post a blog on that one as well so stay tuned.

There is so much more I would have like to have covered but I think I have rambled on enough.  To our friends at Dell, I say congratulations on a job well done.  To our AMD@Home blog readers, this is quite a capable little device that was whisper quiet with low power requirements. It was able to handle just about everything I could throw at it without issue. Even at the base configuration, to have such an elegantly designed, HD capable machine available at for $229 from Dell is astounding. It would be hard to build a similar machine yourself at that price.  I think I know what is going on my Christmas list — now I just need to worry if I have been good enough this year.

Till next time, Happy Trails!

Jay Taylor is a Senior Developer Relations Engineer at AMD. His postings are his own opinions and may not represent AMD’s positions, strategies or opinions. Links to third party sites are provided for convenience and unless explicitly stated, AMD is not responsible for the contents of such linked sites and no endorsement is implied.

Back in June, I wrote a brief blog on some interesting developments from Microsoft, Hulu and YouTube.  I covered how each of these vendors had released news and/or applications to bring more content to the HTPC in new and exciting ways.  At that point in time, Microsoft’s announcement of Netflix integration into Media Center was strictly limited to Windows Vista®.  However, I had suggested that they would include this integration into Windows® 7 by launch time.  Well, I am happy to say that Microsoft released an update for Windows 7 in the past couple of days that now adds Netflix.  However, Microsoft did not stop with just the Netflix integration; the update includes support for the Adobe Flash player and even more mainstream content from content providers like CBS, NBC, PBS and others, offering both current  shows like ‘How I Met Your Mother’, ‘Dateline’ and ’60 Minutes’ to  classic shows like ‘Star Trek’, ‘Twilight Zone’, ‘MacGyver’ and more. 

If you have not seen this yet, Hack 7MC has a nice overview on the new features added to Windows 7.

You can also find a discussion on these new changes at The Green Button

While some may raise concerns regarding viewing quality of the content, I think this change should be viewed from a larger perspective.  This change puts the framework in place for delivery of real and interesting content on Windows 7 capable PCs.  I have spent some time over the past couple of nights checking out the content and while it is not HD quality, it was certainly better than low resolution web video I have seen on other sites.  I’m hopeful that the visual quality of the material will be improved upon as time moves forward; it is the framework that I find really exciting.

As I stated previously, these are exciting times for the HTPC.  The role of PC technology in the home is constantly changing for the better.  The industry is rapidly changing, bringing more content to the consumer in ever easier ways to navigate and enjoy.

Till next time, Happy Trails!

Jay Taylor is a Senior Developer Relations Engineer at AMD. His postings are his own opinions and may not represent AMD’s positions, strategies or opinions. Links to third party sites are provided for convenience and unless explicitly stated, AMD is not responsible for the contents of such linked sites and no endorsement is implied.

For those of you that have been following along our AMD@Home blog, you know I have written multiple blogs on HTPC topics such as why you might want one and the cool things you can do with it.  I have even covered how I am using one at home for my family’s TV viewing needs. 

For this entry, I’m adding a little flair to the blog series by taking your through the videos for the assembly of an HTPC and show how easy it is to put one together.  There are a total of 9 videos in this series — most are only a couple of minutes long so it should make for easy viewing.

One of the main advantages of building your own system is that you are in control not only of the cost, but also the features and functions.  You get to choose exactly what components will go into the build and a sense of pride when the job is complete.

The video series highlights the basic steps needed to assemble an HTPC.  It is not necessary to follow the steps in the exact order — these are just a guideline to the assembly process.  The steps and order may be specific to the chassis you are using. 

To keep me and AMD out of trouble (and to keep our lawyers happy), I need to toss in the disclaimer…With any DIY build, you should ensure that you are properly grounded and building in an anti static environment so as not to damage any components.  You should wear the appropriate safety gear and it is always best that trained professionals do the building.  With that said, let’s take a look at the videos.

Intro/Chassis

For this video, I chose the Lian Li C39 for the video build. I wanted something low profile yet still able to support a full ATX PSU and have the additional ability to upgrade further as needed.  However, there are many chassis options available to meet many different needs and budgets.

Optical and Hard Disk Drive Installation

As you can see from video, installing Optical drives and Hard Drives are pretty easy.  You will likely need to adjust the optical drives position so that it properly aligns with the eject button on the chassis.  Also note that HDDs can create a lot of noise and vibration while spinning.  The rubber grommets will help isolate vibration and keep your HTPC quiet.  It is also worth mentioning that some HDDs are more suited for HTPC use than others.  See my earlier blog on Industry Changes to learn more.

Power Supply Unit (PSU) Installation

With this chassis, I chose to install the PSU after setting up the drives so that I would have more room to get to the drive bay.  Other chassis may follow a different order depending on how it’s laid out.  Note that for an HTPC, you typically don’t need a high wattage supply so look for one that is quiet and stable rather than high wattage which can create more noise.  Typically, anything over 350W should be OK for most HTPC configurations, however, this is somewhat dependent on just how many different devices you are installing.

Motherboard Installation

As you can see here, I waited to install the motherboard until the other components were set up.   Be careful not to scratch the bottom of the motherboard on the board standoffs/mounts.  This could cause shorting or stability issues. 

TIP: If the board standoffs on the chassis do not provide enough support in critical parts of the board where you might be applying pressure (installing memory, cables, etc.), get some electrical tape and roll it up (like a sleeping bag) until it is about the thickness of the standoffs.  Then using another piece of electrical tape, tape it down to the chassis in the areas where you want extra support.  Since the electrical tape is non conductive, it will provide support without creating a short against the motherboard.

Cable/Wiring 

Consult your motherboard documentation for the exact layout of the pin headers and wiring. While I did not take all the time necessary for the video, I can’t say this enough:  It is important that you wrap up and tie off any unused  cables.  Use zip ties (zip strips) or other non metallic material to get those cables out of the way.  They are not expensive so be generous when applying those zip ties. Not only will this make the inside of your chassis look better, it will greatly aid in allowing air to circulate through the chassis more effectively.   Bad airflow leading to overheating components is a common cause for system stability issues.  Tie Off Those Cables!

Audio Installation

Some boards use integrated audio so you may not need to follow this step.  Refer to your motherboard manufacturer to determine how the audio on your system will be set up and connected.

You will also note that because the board I am using supports integrated video, I did not need to install a discrete graphics card.

TV Tuner Installation

As you can see here, there are a lot of different TV tuner options for your HTPC. If you are installing a TV tuner in your HTPC, find one that best meets your needs and budget.  For North American builders, it is also important to know whether you are looking for an over-the-air solution, clearQAM solution or digital cable card solution.  For those in regions outside North America, you will need to determine if you need a tuner that supports DVB-T, DVB-S or other regional formats.

Memory Installation

Most motherboards will offer a dual channel memory configuration with 4 slots.  While gaming PCs or high end workstations might benefit from installing the memory in the slots nearest the CPU, HTPCs are not high demanding memory implementations.  Therefore, it probably won’t make much difference which slots you choose to install the memory in.  However, refer to your motherboard’s manual for the recommended procedure.

CPU/Heatsink Installation

One of the final steps in this build was to install the CPU and Heatsink.  Our CPU sockets are often referred to as ZIF (Zero Insertion Force) sockets.  This means it should require no force to install the CPU.  The CPU should just drop into the socket once the lever is raised.  If you have to apply any pressure to install the CPU…STOP.  This means that there is a problem somewhere. Perhaps the pins are not properly aligned with the socket holes, the socket lever is not raised or some other issue has occurred.  

With the assembly complete, you are just about ready to power up and start installing the operating system, drivers and applications.  Soon you will be on your way to enjoying your new HTPC and all the functions and features it offers.  Again, if you would prefer a pre built system, you might want to read through my Build or Buy blog post.

You can find these and other AMD related videos on our AMD Unprocessed Channel on Youtube.

 Till next time, Happy Trails!

Jay Taylor is a Senior Developer Relations Engineer at AMD. His postings are his own opinions and may not represent AMD’s positions, strategies or opinions. Links to third party sites are provided for convenience and unless explicitly stated, AMD is not responsible for the contents of such linked sites and no endorsement is implied.

As stated in the first part of this blog series, I have seen different sites put together a list of potential HTPC hardware for budgets under $1000 USD.  While many of these sites are showcasing some nice systems, I think there are multiple ways to approach this project.  As such, I put together my own list for a potential HTPC build while offering some options to hit different price points — entry level, mainstream/mid level and higher end systems — each less than $1000 USD.   In part one, I covered the basic entry level system.  It served as a starting point for a system that could be easily upgraded.  This time, I want to look at some upgrades we can do to the entry level system to enhance the features/functions of the HTPC that make it more of a mainstream system.

So what can you expect from a mainstream HTPC build?  It should be able to easily handle all the same tasks as the entry level build and more.  With the mainstream system, we can add Blu-ray playback, transcoding content for portable devices, streaming content to other devices (other PCs, extenders, etc.) and TV tuning functionality. 

I would like to point out, these are just guideposts to provide a frame of reference for feature sets, functions and price points.  Some features may be more important than others to you as the reader.  Therefore, you may want to consider changing individual components to better meet your needs.  I am listing some optional equipment for your consideration.  I have tried to note component choices that are unchanged from the entry build and those that are upgrades.

Motherboard (Unchanged)
Like before, at the heart of any HTPC platform is the motherboard and critical to the motherboard is the chipset. So, starting with the Gigabyte GA-MA785GPMT-UD2H board from last time, this board has a host of features that make for a good HTPC system.  Being uATX, it can be put into a reasonably sized chassis (think ~VCR size). It is based upon the AMD RS785G chipset so it has great video performance and supports HD resolutions (including Blu-ray), when combined with an HD monitor. The UVD-2 support along with the powerful integrated graphics and 128MB of sideport memory provide smooth video playback. The HDMI output offers easy connectivity to your HD TV. All-in-all, this makes for a good solution for the HTPC. 

Motherboard: Gigabyte GA-MA785GPMT-UD2H $94.99 USD
http://www.newegg.com/Product/Product.aspx?Item=N82E16813128399&Tpk=GA-MA785GPMT-UD2H

CPU (Upgrade)
As stated earlier, processing power plays an important role in an HTPC. Depending on what it is you want to do with your HTPC, you may need more speed in your CPU or you may need more cores in your CPU.  To improve the system responsiveness in transcoding as well as to deliver more horsepower to the system so it can handle multiple video streams to other devices on the network, I opted for the AMD Phenom^TM II X3 705e triple-core processor.  This is a nice balance between frequency and core count, yet still a low power processor at 65W.

CPU: AMD Phenom^TM II X3 705e triple-core processor $129.00
http://www.tigerdirect.com/applications/searchtools/item-details.asp?EdpNo=4695460&SRCCODE=GOOGLEBASE&cm_mmc_o=VRqCjC7BBTkwCjCECjCE

CPU Cooler (Optional Upgrade)
This one can be a little harder to address. When buying an AMD Processor In a Box (PIB) product, the heatsink will generally come with the CPU purchase in a nice box. These can be very effective and quiet coolers for most HTPC tasks.  However, there are some solutions out there designed for quiet operation.  Some are low profile while others are passive (no fan) solutions.  Therefore, in addition to the stock cooler, I am providing some optional cooling solutions for those that are interested.  However, I am not adding these into the overall pricing since the stock cooler is great for most HTPC builds.

Scythe Mini Ninja is a nice cooler with a quiet design. However, it may not fit in all chassis designs. $35.99 
http://www.directron.com/scmnj1100.html

Noiselimit Silent Flux Media Cooler is another nice option. It too is a quiet design with a low profile. $39.99
http://www.directron.com/3100003.html

Memory (Unchanged)
Now for memory. There are not a lot of optimizations a memory vendor can do for an HTPC type scenario. Unlike video games applications or other mainstream desktop applications, HTPCs don’t need the fastest memory available. Likewise, they don’t necessarily need huge amounts of memory to provide great performance. I have found that 2GB is a pretty good amount of memory to start with for an HTPC. Rule of thumb is to get as much as possible  of the fastest memory that fits within your budget.  For cost effectiveness, brand recognition and performance, I chose to go with memory from Kingston for this build.

Memory: Kingston 2GB Kit (2×1GB) of DDR3 1066 $46.49 USD
http://www.newegg.com/Product/Product.aspx?Item=N82E16820134492

Note: It is a good idea to check with your board manufacturer for compatible memory.  It should also be pointed out that if you are using a 32 bit operating system, anything over 4GBs will not be recognized by the system (actually about 3.5GB will be seen by the OS).

Audio (Included)
One thing I did not mention last time was the audio solution.  Depending on your audio requirements, the motherboard has multiple options to handle audio.  Audio can be run over HDMI to your AVR or TV or alternatively, you can pass the audio over the optical SPDIF port controlled by the the Realtek codec on board (RT889 chip). 

HDD (Upgrade)
Vendors like Seagate, Samsung, Western Digital, and Hitachi also offer a variety of products for the PC space. Like AMD, they have some products that target the lower power environment.  Seagate’s Pipeline HD series, Western Digital’s Green series, Samsung’s EcoGreen and Hitachi’s Cinemastar series drives are optimized for low power and quiet operation.  These drives typically have fluid bearings, improved firmware and thermals that make them well suited for HTPC applications.  Like memory, more storage is usually a good thing for an HTPC.   

For this system, I opted to go with a larger drive to allow more room for storage of content. However, one option to consider is having a multi drive system.  For example, 1 drive for the OS + applications and 1 drive for content storage (shows, pictures, music, etc). In that case, 1 smaller drive and 1 larger drive might better serve your needs.

HDD: Samsung Eco Green 1TB Green HDD $79.99 USD
http://www.newegg.com/Product/Product.aspx?Item=N82E16822152173

Optical Disk Drive (ODD) (Upgrade)
Selecting an optical drive can be a little challenging because it is often hard to tell the advantages of one over another. I have used a variety of drives over the years — some more reliable than others and some quieter than others. However, for me when it comes to the HTPC discussion, it boils down to DVD vs. Blu-ray. With the format war over and Blu-ray drive prices coming down, it does make for a nice upgrade to the HTPC. 

ODD: Lite-On Blu-ray ROM (OEM version) $59.99 USD
http://www.newegg.com/Product/Product.aspx?Item=N82E16827106325

Note: Drive listed is the OEM version. It may or may not ship with Blu-ray playback software Retail versions typically ship with additional software.  However, I am listing some optional Blu-ray software below that has worked well for me.

Chassis (Upgrade)
In an earlier blog, I covered some of the different chassis solutions on the market. Selecting a chassis really depends on personal tastes, budget, room decor, etc. The criteria I used below included a combination of price and functionality, yet still fitting the overall HTPC look and feel. In this case, I am listing a couple of options that can be nice choices for an HTPC.  However, adjust your choice and budget based upon your own goals.

The nMedia chassis has a nice feature set supporting multiple HDDs, full ATX PSU, good airflow and full size card support.

 nMedia H1000b $79.99
http://www.newegg.com/Product/Product.aspx?Item=N82E16811204030

The Antec chassis is a low profile solution that supports a pretty small footprint.  It offers an integrated PSU, front panel display and remote control and adjustable speed chassis fans.  However, note that being low profile, it may not work with your CPU cooler.  Be sure to check the dimensions of your preferred cooler to ensure compatibility with this chassis. 

Antec uFusion Remote 350 $99.99
http://www.newegg.com/Product/Product.aspx?Item=N82E16811129046

Power Supply Unit (PSU) (Optional Upgrade)
In the previous blog, I mentioned that Power Supplies are an important part of an HTPC build.  The Antec chassis I used this time also included a 350W PSU which is pretty good for most HTPC configurations using this chassis.  However, the other chassis does support a standard ATX type PSU, which greatly opens up the option for selecting quiet, reliable supplies.

For the mainstream build with the nMedia chassis, I opted for the Corsair 450VX.  This is one of the more quiet PSUs I have had the pleasure of working with on previous HTPC builds. 

Corsair 450VX PSU $74.99
http://www.newegg.com/Product/Product.aspx?Item=N82E16817139003

TV Tuner (Optional Upgrade)
Now, to me this is a really nice addition to an HTPC. There are some that will argue that TV tuners provide no real value since you can find just about anything online.  For some, this may be true, but others find a great deal of value in a TV Tuner card. In fact, some people (like myself) install multiple tuners so they can watch/record multiple shows at one time.  Being able to combine broadcast TV with online TV content is somewhat of a best of both worlds approach.  Likewise, some tuners not only support ATSC content (Digital OTA broadcasts) but also support Clear QAM content from cable companies.  Therefore, you may want to consider adding a TV Tuner to your HTPC build. 

As mentioned in an earlier blog, I used this hybrid approach of TV tuners + online content to cancel my satellite service and save money each month.  The TV Tuner provides me with some really nice HD content for free (over the air TV content) and I have the option of using my HTPC as a DVR as well. For everything else, I just go online. 

For this build I opted for the TV Wonder 650 card from Diamond Multimedia.  There is also a retail version of this unit that comes with additional hardware and software for just a little more money.  It is nice to have but not required, since the OEM units will work just fine as well. I should also point out that the tuner listed is a combo tuner which means it has 2 fully functional tuners integrated into the design and both can operate at the same time. You can opt for a Hybrid tuner which also has two tuners, but only one can be active at a time. This can save you a little money if budgets are tight.  I am using two of the ATI branded version of this card and it works great. 

TV Tuner: Diamond TV Wonder 650 $84.99 (OEM Version)
http://www.newegg.com/Product/Product.aspx?Item=N82E16815306018

Now, the unit does come with a remote, but I recommend using the standard MCE remote below along with the media center software from Microsoft.  It makes things very simple to set up and use. 

Note: Make sure you purchase the appropriate tuner card interface (PCI or PCIe®) to match the available slot on your motherboard.

Remote Control (Unchanged)
The Remote Control is another important piece of your HTPC. I have already posted about this in part 1 and part 2 of the series. Microsoft’s Media Center product that is included with some versions of their operating system does a very nice job of bringing the “10-foot experience” to the PC. While the basic remote is certainly one option, there are some remotes that provide more functionality than the basic remote and are programmable so you may be able to simplify at the same time. Therefore, you might want to read through the series on remote controls to see what options are out there.  However, for the sake of simplicity, I am keeping the same remote option for this build.

Remote: Anywhere Media Center Remote with IR receiver $22.99 USD
http://www.newegg.com/Product/Product.aspx?Item=N82E16880121001

Keyboard/Mouse (Unchanged)
Similar to remotes, keyboards are another important part of your HTPC solution. See part 1 of the Remote Control series for more info on keyboard options. For this build, I kept the choice of the Logitech keyboard/mouse Bluetooth solution for both range and functionality. Having both keyboard and mouse functionality out of the same device makes it easy to use. 

Keyboard: Logitech Mediaboard Pro $69.99 USD
http://www.newegg.com/Product/Product.aspx?Item=N82E16879212011

Operating System (Unchanged)
There are many different options here and many people will have their own opinion of what operating system to use.  With Microsoft® Windows® 7 just around the corner (October 22nd expected release date), it is probably worthwhile to wait and use that as everything I have seen with Windows 7 looks to be very impressive for both general PC duties in addition to HTPC duties.  (A Windows 7 capable PC configuration will be required.)   Linux® is another very viable option and very cost effective. However, you might need more experience with setting up and configuring a Linux based system to get everything working to your liking.

Blue-ray Software (Optional)
Microsoft’s media player included with their OS works great for standard DVD playback.  However, it is not capable of playing back Blue-ray discs.  As such, additional software is needed.  As mentioned above, some Blu-ray drives will ship with the necessary s/w for Blu-ray playback and like many drive s/w bundles, it may or may not work well for you.  I have found some Blu-ray playback s/w that has worked pretty well for me.

Arcsoft Total Media Theater
http://www.arcsoft.com/estore/software_title.asp?ProductCode=TMT3P

Cyberlink Power DVD
http://www.cyberlink.com/products/powerdvd/overview_en_US.html

Conclusion
OK, that covers most of the components you will need for the mainstream system.  The total cost of the hardware listed above starts at $688.42 USD + operating system.  I did not include the playback s/w nor the optional coolers in the cost because as mentioned some ODD drives come bundled with playback s/w and the stock cooler works well for most HTPC builds. 

Overall, you can see that by increasing the budget about $250, we can greatly increase the functionality and features of the HTPC by adding Blu-ray playback, Live TV playback via a TV tuner, DVR functionality, better CPU horsepower for streaming and transcoding, etc. and a more aesthetically appealing chassis.  Still well below the $1000.00 USD and we get a very functional HTPC that can probably handle just about anything you throw at it.  If your budget is somewhere between the entry build and the mainstream system, this should give you an idea of different upgrade options to get more features that fit within your budget.

Note, I am listing prices in US dollars found online as of the day this was written. These are not the only sources for hardware and there are plenty of choices on where to purchase.  Likewise, this does not reflect shipping, rebates, bundle deals, etc. or online retailers for readers in other countries.  So do your homework to get the best deals when you purchase and you may be able to get even better prices than what’s listed here.  

For those that would rather purchase a pre configured HTPC, see my “Build or Buy?” blog posting.

So, as you can see, building a mainstream HTPC does cost more, but you also get more functionality.  Again, don’t look at this blog as a hard requirement but more of a sign post to help you along the way.  If there are functions that are more/less important to you, feel free to swap out a more suitable part for your needs and budget.

 Till next time, Happy Trails!

Jay Taylor is a Senior Developer Relations Engineer at AMD. His postings are his own opinions and may not represent AMD’s positions, strategies or opinions. Links to third party sites are provided for convenience and unless explicitly stated, AMD is not responsible for the contents of such linked sites and no endorsement is implied.

So, you’ve got this fancy new HTPC, but how do you use it?  Well, I thought we would take a look at the various options for controlling your HTPC.  I am splitting this post into a two part series covering both keyboard and mice, plus wand style solutions.  In the first post of this series, I covered a few options for keyboards and mice.  This time, I will spend a little time covering the wand style remotes.  Like previous posts on technology, products covered are limited to what I had immediately available — not intended to cover all the different options out there. Likewise, this is not intended to be a review of all the different solutions, just an introduction to a few available products. 

I was fortunate enough to get my hands on a few of these different solutions for testing thanks to our technology partners.  As such, I brought these devices home for a brief period so I could see how my family liked them. I know, I said I should never use my family as beta testers, but this seemed a little different and I felt it would be more useful to provide their feedback in addition to mine to provide a wider cross section of user experiences. More about their responses later on. 

The ultimate goal of the HTPC for me is that I would never have need of a keyboard or mouse and that I could do everything with a remote in hand.  As covered in the “What Can an HTPC Do?” series (part 1 and part 2), I showed you a lot of what you can do with just a remote in hand.  So, it made a lot of sense to try out a few different wand style remotes and see how well they get along with Windows® Media Center.
 
Technology
Similar to technology used for wireless keyboards, wand style remotes leverage infrared (IR), radio frequency (RF) and Bluetooth (BT) based technologies.  The difference can impact cost, reliability, line of sight, distance, and other factors.  IR solutions are typically the cheapest solutions to implement and the most common.  However, RF and BT technologies are starting to show up more in remote controls as well.  

Some remotes have integrated cursor control via a track ball or gyro (like a Wii controller). Now, I personally feel that the integrated solution is a really nice feature that eliminates the need for a separate mouse, but if most of your time is spent inside applications like Media Center, then this may be less important.  

Other features found in some remotes are touch screens and rechargeable batteries.  These can be a nice touch (no pun intended) as the screens can make some functions easier to use.  The recharging station is often handy and can save the consumer the hassle of changing batteries and can also be more convenient.  This is especially true when the remote has a screen on it as well since that screen can drain the battery pretty quickly.  Not all remotes offer recharging stations so be sure to check the package before making your purchase if that is important to you.

Some vendors will include software applications and drivers with their remotes.  Some of these applications can be useful for media playback, programming hotkeys and buttons, etc. These may also automatically check for version updates for you, but this can also happen at less than ideal times.  However, you often have control over when these updates should or should not take place.  So, let’s look at a few different solutions (in no particular order). 

nMedia PC
One of the first RF remotes I tried was the remote with the nMedia PC RF keyboard and remote combo package.   

This has almost a pistol grip type feel.  If feels very solid in construction with a rubberized coating. It offers a host of buttons for different operations along with an integrated track ball for cursor control.  The array of buttons can be a little daunting as your fingers navigate their way around the remote, but with practice you will quickly learn where the most used buttons are located and be using them without looking.  Using the trackball can take a little practice, especially if you are more familiar using a full size mouse in a desktop environment, but again it does not take long to get accustomed to the trackball.  As mentioned, cursor control can add a nice touch when you leave the Media Center environment and have to navigate the desktop screen — having that trackball available can really add value.  The included USB RF receiver is nice and eliminates the need for line of sight. There is an option to bundle the keyboard with a remote as well so this option can be a great, cost effective solution for those on a tight budget.

Microsoft
Another interesting solution comes from Microsoft. Microsoft has a basic IR Media Center remote control with a USB receiver.  This has a very comfortable feel in the hand.  Most of the buttons are large and easy to find.  Microsoft also used back lighting on some of the more commonly used buttons (Play, Pause, FF, Rew, etc.) so they are easier to find in low light situations.  However, they only light up after an initial button press and then stay lit for about 5 seconds or so.  It has a clearly labeled “Green Button” so you can quickly launch Media Center or return to the main menu if already in Media Center.  The quick access Guide button will pull up your EPG with ease (assuming you have a TV tuner installed), and the channel up/down and volume up/down all work as you would expect from a typical wand style remote.  It also has the IR receiver (via USB connection) on an extended cable so you can easily route the receiver to just about any location (within reason).

While it does not offer cursor control, there is a 3rd party application that you can install that is supposed to provide that type of functionality, though I did not try it at the time of this posting.  

Gyration
Gyration offers a couple of remote control solutions for the HTPC.  They initially offered their Media Center Remote product, but are now offering a second remote called the Air Music Remote.  The difference between the two remotes is that the Air Music Remote offers an LCD screen that can be used to navigate to music options.  They both use 2.4Ghz RF technology so line of sight is not an issue. Range seems to be pretty good as well, though admittedly, my couch is only about 12 feet from the remote.  I would recommend using a USB extension cable to get the USB receiver out from behind the metal chassis — it does help improve the responsiveness of the remote. 

Unfortunately, I did not have access to the Air Music remote to give it a try but I am currently using the Media Center remote.  The Gyration remote works very well for Media Center navigation and operation.  What makes the remote interesting for me is the integrated cursor control.  It does take some getting used to, but once you do, it works very nicely.  The “Green Button” along with navigation control works well inside Media Center and by adding cursor control, so I can easily exit Media Center, open a browser window and quickly navigate my bookmarked sites. I can watch Internet streaming TV content without ever picking up a keyboard.  Buttons are large enough to find easily by touch without being either too obtrusive or too small.  It is programmable so you can set it up to power up/down other devices and gain some limited functional control over those other devices.  Overall, I am pleased with the operation of the remote and I use it regularly for my HTPC.

Logitech
Logitech has some great products as well, two of which are nice remote controls for HTPC user.  The Logitech Harmony One^TM and the Logitech Harmony 1100^TM are programmable remotes for all your devices.  Like the Microsoft solution above, the Logitech solutions listed leverage IR technology. Both Harmony remotes come with recharging stands to keep the batteries fresh.  The Harmony 1100 can go through a charge within a few days so having the charging station nearby is great for keeping it handy and keeping it charged.

The Harmony One is a great remote and very flexible.  One of the biggest features on the Harmony remotes is their programmability. If you are like many users, you may have multiple devices under your TV — perhaps a stereo amplifier, DVD player, HTPC and other devices.  The Harmony One offers the ability to connect to a PC and sync up with downloaded command codes for different devices along with customized icons.  While universal remotes are commonplace, the difference here is that you have the option to customize buttons.  The Harmony One has “hard buttons” and “soft buttons” and you can program each of these buttons to specific functions if you wish.  For example, you can change the function of the Menu hard button to act as the “Green Button” to launch Media Center.  Likewise, you could program the Exit hard button to act as a “MCE back button”.  Furthermore, you can program and label the soft buttons to various functions as well and then operate those soft buttons via a touch screen.  This really drives a level of flexibility not found on many other remotes. 

The Harmony 1100 is somewhat of the “uber” remote.  It too provides a level of flexibility and programmability found in other Harmony devices.  However, it has fewer hard buttons and does most of its magic through programmable soft buttons operated via a touch screen.  Like many Harmony remotes, it provides extensive 1 button action to turn on multiple devices and set up the devices for a specific operation.  For example, you can set up a remote soft button as a “play DVD” that will turn on your TV, select the appropriate input, turn on your DVD player and start playback of the DVD.  This makes for a very easy to operate remote.  Like the Harmony One, it also has the basic up/down/left/right navigation hard buttons for easy Media Center operation.  Included are volume up/down and channel up/down as well.  The Harmony remotes can also be used to access the various functions of your other devices as well.  For example, screen layout, PiP, Picture swap, etc. can all be programmed to soft buttons.  These are incredibly flexible remote solutions.

To me, the real strength of the Harmony remotes is when you have multiple boxes to control and you want full access to control all those other devices with an easy to use remote.  It may take you a few times through the Remote Set up process on your PC to get everything exactly as you want it, but once you do, it is a really nice solution.  It is important to note though that if your HTPC chassis does not have an IR sensor, you will need to pick up one (i.e. USB IR receiver) so the remote will work with your HTPC.   

User Experience
Like the keyboard blog I posted, it is difficult to write in depth about the full user experience and functionality of all these remotes in a single post so I will be brief.  Each one of these products could easily deserve its own post, therefore, I would suggest that you read some in depth reviews and go to the product pages to get a list of the full functionality offered by each of these products as well as to learn what other solutions are out there that might best meet your needs.

User experiences of these solutions differ from one unit to the next and also from one person to the next.  Everyone in my family quickly adapted to all the different remotes.  However, each also found their favorites.  I found the Gyration remote to provide enough functionality to power up/down other devices along with easy navigation both inside and outside Media Center.  While not as programmable as the Logitech products, the integrated mouse functionality was great. Others in the family really liked the one button ease of use of the Harmony products.  Their flexibility to be able to operate so many things and the touch screen functionality was pretty impressive.  For those on a tighter budget both the Microsoft Media Center remote and the nMedia combo solutions offer great value and functionality.  I don’t think there is any one, right solution as each of these solutions should work equally well.  It just depends on what your needs might be to determine which remote works best for you.  If you have some feedback about this blog or have some info you would like to share on your favorite HTPC keyboard solution, please feel free to leave a comment.

 Till next time, Happy Trails!

Jay Taylor is a Senior Developer Relations Engineer at AMD. His postings are his own opinions and may not represent AMD’s positions, strategies or opinions. Links to third party sites are provided for convenience and unless explicitly stated, AMD is not responsible for the contents of such linked sites and no endorsement is implied

I have seen different sites put together a list of potential HTPC hardware for budgets under $1000 USD.  While many of these sites are showcasing some nice systems, I think there are multiple ways to approach this project.  As such, I put together my own list for a potential HTPC build while offering some options to hit different price points — entry level, mainstream/mid level and higher end systems — each less than $1000 USD. So here’s the first part of the series: The Entry Level Build.

For me, there are two things that drive my decision process when making a component selection for an HTPC; product performance/features and cost. I want technology that will offer good performance, aimed at the HTPC space, yet will not “break the bank”.  As I outlined in my previous blogs, the HTPC does not require the absolute highest performance products, nor should it be about buying the cheapest products. What the HTPC needs is a combination of more balanced products that offer good performance and low power draw — all within a reasonable budget. I have seen too many individuals less that satisfied with their HTPCs because they bought the absolute highest performance products on the market and their HTPC was just too loud.  Similarly, I have seen many others buy the cheapest products they could find only to realize their HTPC could not handle the tasks they desired.

So what can you expect from an entry level HTPC build?  An entry level system can handle many of your standard HTPC duties. It should be able to offer smooth HD playback without dropping frames. It should handle most streamed online content (think Hulu, Netflix, YouTube, etc.).  It should be able to drive HD resolutions (1080p, 720p) and do a decent job of upscaling standard DVDs.  It should be able to play most mainstream games at lower resolutions (1024 x 768, 800 x 600, etc.) and still look good.  However, check with the game manufacturer for complete system requirements. 

Motherboard
At the heart of any HTPC platform is the motherboard and critical to the motherboard is the chipset. For this entry level budget HTPC build, I opted for the Gigabyte GA-MA785GPMT-UD2H. This board has a host of features that make for a good HTPC system.  Being uATX, it can be put into a reasonably sized chassis (think ~VCR size). It is based upon the AMD RS785 chipset so it has great video performance and supports HD Resolutions (including Blu-ray), when combined with an HD monitor. The UVD-2 support is really useful for hardware acceleration of video related content.  The powerful integrated graphics eliminates the need for a discrete card (saving power and money). The HDMI output offers easy connectivity to your HD TV. All-in-all, this makes for a good solution for the HTPC. 

Motherboard: Gigabyte GA-MA785GPMT-UD2H $94.99 USD
http://www.newegg.com/Product/Product.aspx?Item=N82E16813128399&Tpk=GA-MA785GPMT-UD2H

CPU
Processing power plays an important role in an HTPC. Depending on what it is you want to do with your HTPC, you may need more speed in your CPU or you may need more cores in your CPU. For example, if you will be using your HTPC to do a lot of transcoding, a CPU with more cores will offer you better performance. However, some applications may benefit from higher frequencies. You should really look at all the applications you are going to be using with your HTPC and determine if those applications would benefit from more cores or higher frequencies. In any case, you will still want low power CPUs for their superior thermal performance.  The processor I selected for this entry build is the AMD Athlon^TM II X2 240 dual-core processor.  It is a dual core, low power processor that offers a great performance for the price. 

CPU: AMD Athlon^TM II X2 240 dual-core processor $60.99 USD
http://www.newegg.com/Product/Product.aspx?Item=N82E16819103688

CPU Cooler
This one can be a little harder to address. When buying an AMD Processor In a Box (PIB) product, the heatsink will generally come with the CPU purchase in a nice box. These can be very effective and quiet coolers for most HTPC tasks.

Memory
Now for memory. There are not a lot of optimizations a memory vendor can do for an HTPC type scenario. Unlike video games applications or other mainstream desktop applications, HTPCs don’t need the fastest memory available. Likewise, they don’t necessarily need huge amounts of memory to provide great performance. I have found that 2GB is a pretty good amount of memory to start with for an HTPC. Rule of thumb is to get as much of the fastest memory that fits within your budget.  For cost effectiveness, brand recognition and performance, I chose to go with memory from Kingston for this build.

Memory: Kingston 2GB Kit (2×1GB) of DDR3 1066 $43.99 USD
http://www.newegg.com/Product/Product.aspx?Item=N82E16820134492

Note: if you are using a 32 bit operating system, anything over 4GBs will not be recognized by the system (actually about 3.5GB will be seen by the OS).

HDD
Vendors like Seagate, Western Digital, and Hitachi also offer a variety of products for the PC space. Like AMD, they have some products that target this lower power environment.  Seagate’s Pipeline HD series, Western Digital’s Green series, and Hitachi’s Cinemastar series drives are optimized for low power and quiet operation.  These drives typically have fluid bearings, improved firmware and thermals that make them more suited for HTPC applications.  Like memory, more storage is usually a good thing for an HTPC.  If you plan on doing a lot of recording of TV, storing movies, music, etc. then again, purchasing as much storage as your budget allows is probably a good thing.  For this build I chose the Western Digital 500GB Green drive.

HDD: Western Digital 500GB Green HDD $54.99 USD
http://www.newegg.com/Product/Product.aspx?Item=N82E16822136358

Optical Disk Drive (ODD)
Selecting an optical drive can be a little challenging because it is often hard to tell the advantages of one over another. I have used a variety of drives over the years — some more reliable than others and some quieter than others. However, for me when it comes to the HTPC discussion, it boils down to DVD vs. Blu-ray. With the HD DVD / Blu-ray format war over, it does make the decision a little easier, but you still really need to look at what you are planning to do and how much you want to budget for the ODD. Upscaled DVD content can look very good on an HDTV. In my opinion, the clarity of Blu-ray really starts to show up at screen sizes larger than 50 inches. At 50 inches and below, upscaled DVD can look very nice and can save the consumer some money.  Therefore, to keep costs within an entry level price point, I opted for a standard DVD. 

ODD: Lite-On DVD ROM $17.99 USD
http://www.newegg.com/Product/Product.aspx?Item=N82E16827106274

Chassis
In an earlier blog, I covered some of the different chassis solutions on the market. Selecting a chassis really depends on personal tastes, budget, room decor, etc. The criteria I used below included a combination of price and functionality, yet still fitting the overall HTPC look and feel. However, adjust your budget based upon your own goals.

Chassis: HEC SECC 7K09 $54.99 USD
http://www.newegg.com/Product/Product.aspx?Item=N82E16811121027

Power Supply
Included in Chassis for this build.  PSU selection is an important topic and we will talk more about this in upcoming blog.

Remote Control
The Remote Control is another important piece of your HTPC. I have already posted part 1 of the 2 part series on remote controls and I am currently working on the second part of that series. Microsoft’s Media Center product that is included with some versions of their operating system does a very nice job of bringing the “10-foot experience” to the PC. They make it very easy to access things like live and recorded TV (assuming you have a TV tuner installed), music, photos and more with just a remote. In fact, I have my HTPC set up so that I rarely (if ever) need to pick up a keyboard. As such, I think every HTPC user should add a remote to their configuration. Some higher-end remotes can be very expensive while offering more functionality, but may not be required for many of the basic functions of the HTPC. For a budget solution, I opted for the basic IR-based Media Center remote from Anywhere.

Remote: Anywhere Media Center Remote with IR receiver $22.99 USD
http://www.newegg.com/Product/Product.aspx?Item=N82E16880121001

Keyboard/Mouse
Similar to remotes, keyboards are another important part of your HTPC solution. See part 1 of the Remote Control series for more info on keyboard options. For this budget build, I chose the Logitech keyboard/mouse Bluetooth solution for both range and functionality. Having both keyboard and mouse functionality out of the same device makes it easy to use.  You could buy a separate keyboard and mouse as an option, but you would probably be close to this same price anyway.

Keyboard: Logitech Mediaboard Pro $69.99 USD
http://www.newegg.com/Product/Product.aspx?Item=N82E16879212011

Operating System
There are many different options here and many people will have their own opinion of what operating system to use.  For simplicity, I am suggesting Microsoft’s Windows Vista® Home Premium solution.  However, with Microsoft® Windows® 7 just around the corner, it may be worthwhile to wait and use that instead.  Everything I have seen with Windows 7 looks to be very impressive for both general PC duties in addition to HTPC duties.  (A Windows 7 capable PC configuration will be required.)   Linux® is another very viable option and very cost effective. However, you might need more experience with setting up and configuring a Linux based system to get everything working to your liking.

OS: Windows Vista® Home Premium $99.99 USD (or wait for Windows® 7 Home Premium)
http://www.newegg.com/Product/Product.aspx?Item=N82E16832116485

OK, that covers most of the components you will need.  The total cost of the hardware listed above comes to $420.92 USD + $99.99 USD for the operating system.  Not a bad price for everything you are getting.  Prices do not reflect any rebates or discounts that might be available nor does it include shipping costs.  Sometimes you can get bundle deals, free shipping, etc. So do your research to get the best deals when you purchase and you may be able to get even better prices than what’s listed here. 

Note, I am listing prices in US dollars found on Newegg as of the day this was written. They are not the only source and there are plenty of choices on where to purchase.

For those that would rather purchase a pre configured HTPC, see my “Build or Buy?” blog posting.

So, as you can see, building a budget HTPC is not all that expensive plus you can get very robust functionality.  In the next part of this series, we will look at a mainstream, mid level build and bump up some of the functions and features to get a more robust HTPC experience.

Till next time, Happy Trails!
Jay Taylor is a Senior Developer Relations Engineer at AMD. His postings are his own opinions and may not represent AMD’s positions, strategies or opinions. Links to third party sites are provided for convenience and unless explicitly stated, AMD is not responsible for the contents of such linked sites and no endorsement is implied.

So, you’ve got this fancy new HTPC, but how do you use it?  Well, I thought we would take a look at the various options for controlling your HTPC.  I am splitting this post into a two part series covering both keyboard and mice solutions in the first post while wand style remotes will be featured in the second post.  Like previous posts on technology, products covered are limited to what I had immediately available — not intended to cover all the different options out there. Likewise, this is not intended to be a review of all the different solutions, just an introduction to a few available products. 

I was fortunate enough to get my hands on a few of these different solutions for testing thanks to our technology partners.  As such, I brought these devices home for a brief period so I could see how my family liked them. I know, I said I should never use my family as beta testers, but this seemed a little different and I felt it would be more useful to provide their feedback in addition to mine to provide a wider cross section of user experiences. More about their responses later on.

Keyboards and mice come in many different flavors; some are clearly aimed at the desk environment with their cables running to the back of your PC (aka the 2 foot experience).  They provide little value in a living room setting while you are sitting on the couch.  However, with the advent of wireless keyboards, you  are no longer tethered to your PC. 

The ultimate goal of the HTPC for me is that I would never have need of a keyboard or mouse and that I could do everything with a remote in hand.  As covered in the “What Can an HTPC Do?” series (part 1 and part 2), I showed you a lot of what you can do with just a remote in hand.  However, as mentioned, the HTPC is also a fully functional PC and therefore, the addition of a keyboard and mouse opens it up to just about all the things you could do on a traditional PC.  Now, I don’t do my “PC” type activities on my HTPC, but there are a lot of different video websites that I routinely visit for TV content.  Having a keyboard and mouse for searching content on those sites can be useful.  So, let’s discuss some of the technologies and the options available for your HTPC.
 
Technology
First, it is important to understand there are various cordless keyboard technologies on the market.  Some may be infrared (IR) based solutions, while others may be radio frequency (RF) or Bluetooth® (BT) based technologies.  The difference can impact cost, reliability, line of sight, distance, and other factors.  IR solutions are typically the cheapest solutions to implement and work in much the same way as a traditional remote control might work.  Typically, they will have good range but would require direct line of sight to the sensor in order to send the keystrokes (your typing) to your HTPC.  RF on the other hand is usually more common and uses radio waves to send those keystroke.  These can vary in range from 3 feet to 10-15 feet or more but can be impacted by interference from other devices in the home (cordless phones, etc.) or home construction (metals used in the walls, venting, stairway rails, etc). BT keyboards are usually the most expensive solutions, but typically have the longest range and can work well at distances up to 30 feet. 

Some HTPC keyboards integrate cursor control via a mouse pad (like those on laptops), a track ball or other forms into the keyboard design, while others bundle separate mice in the package. Now, I personally feel that the integrated solution is a really nice feature that eliminates the need for a separate mouse.  However, these may not be ideal if you are trying to game on an HTPC.  Integrated cursor control may not have the precision movement or ease of control offered by a separate mouse and therefore may not work as well in a gaming environment. 

Another common feature found in HTPC style keyboards is a rechargeable battery.  This is another nice touch because like any device, these can go through batteries quite often.  Having a recharging deck can save the consumer the hassle of changing batteries and can also be more convenient.  Not all wireless keyboards offer recharging stations so be sure to check the package before making your purchase if that is important to you.

Some vendors will include software applications and drivers with their keyboards.  Some of these applications can be useful for media playback, programming hotkeys, etc.  These may also automatically check for version updates for you, but this can also happen at less than ideal times.  However, you often have control over when these updates should or should not take place.  So, let’s look at a few different solutions (in no particular order). 

Keyboards for HTPC
One of the first RF keyboards I tried was the nMedia PC RF keyboard and remote combo package.   

This is a full size keyboard operating on a 2.4Ghz RF band.  It has an integrated trackball on the right hand side with your left and right click buttons on the left side.  Along the top edge are Internet hot keys and multimedia hot keys for quick access to common functions.  The keyboard has a very nice tactile feel without being loud as you type.  The overall shape has a very comfortable feel in your hands.  Using the trackball can take a little practice, especially if you are more familiar using a full size mouse in a desktop environment.  There is an option to bundle the keyboard with a remote as well (to be discussed in part 2 of this post).  This option can be a great, cost effective solution for those on a tight budget.

Another interesting set of solutions comes from Microsoft. Microsoft has numerous wireless keyboards on the market, but they have some that specifically target Media Center type applications.

The Wireless Entertainment Desktop 7000 is another full size keyboard solution that integrates cursor control along with numerous other functions into the keyboard design. It is a popular choice among many HTPC enthusiasts. It uses BT technology so the range is very good.  It is very thin and light and has a rechargeable battery for ease of use. It too is comfortable and quiet when typing. The many built-in hot keys bring a lot of functionality to the finger tips with a single button press.  It comes bundled with a cordless mouse as well giving you a couple of options for controlling the cursor.  Although more expensive than the nMedia solution mentioned above, it is quite a bit less costly than some of the higher end units on the market while delivering a great mid range solution.  While I did not have one of these to test, I have seen it in several stores and found it a very compelling solution. 

Logitech has some great products as well, two of which are nice keyboard solutions for HTPC users.  The Logitech diNovo Edge^TM and the Logitech diNovo Mini^TM are keyboard and mice solutions that provide two very different user experiences.  Like the Microsoft solution above, the Logitech solutions listed leverage BT technology for great range.    

The diNovo Edge^TM is a full size keyboard and mouse solution for the HTPC.  It has back lit keys, integrated mouse pad, touch based volume slider all in a very slim, rechargeable design.  This is probably one of the more sexy solutions I have seen in keyboards for the HTPC space.  The elegant design is both aesthetically pleasing and very functional.  The hot keys make for quick access to commonly used functions.  The battery seems to last a long time on a single charge, but this depends on how often it is used so mileage may vary, so to speak. When not in use, the recharging station also makes for a convenient stand for storage. This falls into the mid to high end type price point, but you can often find it on sale online.  

The diNovo Mini^TM is a much smaller solution that uses a thumb style QWERTY keyboard and also includes a mouse touch pad.  It comes with a charger and it has pretty good life out of a single charge.  One particularly nice feature included in the diNovo Mini is a switch that converts the touch pad into an up/down/left/right select navigation control (like those found on traditional wand style remotes).  This is pretty handy for having one solution that can navigate Windows® Media Center similar to a wand remote as well as operate as a keyboard and mouse solution for general PC duties. It has media control keys along the top for easy playback of your favorite media content along with channel up/down for TV control (assuming you have a TV Tuner in your HTPC).  It also has back lit keys so you can easily find the letters in low light situations.

User Experience
It is difficult to write in depth about the full user experience and functionality of all these keyboards in a single post so I will be brief.  Each one of these products could easily deserve its own post, therefore, I would suggest that you read some in depth reviews and go to the product pages to get a list of the full functionality offered by each of these products as well as to learn what other solutions are out there that might best meet your needs.

User experiences of these solutions differ from one unit to the next and also from one person to the next.  Full size keyboards are easy to adapt to since most people use them daily with their PCs.  Both my wife and I found the larger keyboards very easy to use and comfortable.  Even my kids liked the full size keyboards.  I personally liked all of them, but found the touch pads a little easier to use since it was the same technology used on my laptop.  However, full size keyboards can take up a lot of space on coffee tables or entertainment shelves in your living room and don’t always fit the decor.  

If you are space constricted, the smaller micro size keyboards or the thumb style like the diNovo Mini might be better suited.  While I like the diNovo Mini a lot (its small size while being fully functional was great), I am just not as adept at the thumb style keyboard as my wife and kids.  My daughter is a texting queen and her lightening fast fingers are a blur as she texts people on her phone.  As such, she was able to quickly adapt to the smaller diNovo mini.  She did mention that the keyboard is bigger than that of her phone, but it did not appear to throw her off at all.  Heck, based upon some of her comments, I have to keep an eye on it just to make sure my daughter does not hijack it for her room.

Therefore, if you are comfortable and quick with texting on phones, the thumb style solutions like the diNovo Mini might make for a great solution for you.  However, if you tend to fumble those smaller keyboards like me (I too often send out garbled messages or take forever just to send a two word response), a full size keyboard might be the answer for you.  I only covered a small amount of solutions on the market; there are a lot of options out there to meet the needs of the consumers. 

Next time, we will look at a few of the wand style remote controls to give you an idea of what is available on the market today.  Stay tuned.  If you have some feedback about this blog or have some info you would like to share on your favorite HTPC keyboard solution, please feel free to leave a comment.

Till next time, Happy Trails!

Jay Taylor is a Senior Developer Relations Engineer at AMD. His postings are his own opinions and may not represent AMD’s positions, strategies or opinions. Links to third party sites are provided for convenience and unless explicitly stated, AMD is not responsible for the contents of such linked sites and no endorsement is implied.

The first is to take on more complex tasks enabling a new kind of user experience.

The second is to serve many persons at once. Combined with the first, we now have persons who are sitting, standing and moving while working, interacting, and enjoying.

The first and second could consume many years of exponential improvements in computing capacity while serving humankind in new and compelling ways.

The third is for machines to idly dream of the day when they will divine their own purpose…

- “Inez Drew”

Q: Could you define the hypothetical home central computer?

A: A multi-user computer which supports several users at once, employing a single pool of computational resources and applications, from multiple locations. Applications may be installed once and used by each user. Settings may be set once and used in each location. User profiles can be customized and each user enjoys their own, separate usage session. The full computing experience is available in multiple locations and computing resources are shared by the group.

Q: What are the envisioned characteristics of a central computer versus a personal computer?

A: The personal computer is personal, being for one user at a time, on a single desktop, in one personal session, in one room. The central computer is designed for several users, each on their own screen, running multiple concurrent, but private sessions, anywhere in the home or beyond. Each user would own a session which encapsulates executing applications, each session mapped to a screen, each screen mapped to its input devices such as a pointer or video camera. Common resources including processing capability, software, data, and media and rich interaction would be available to each user.

Q: From a hardware perspective, how would a central computer differ from a personal computer?

A: A central computer requires additional general purpose computation to support multiple users, high peak-usage behavior to support demanding multimedia tasks while supporting multiple users, capability to accelerate and deliver 3D graphics and video to multiple screens, and multi I/O connectivity to support multiple screens and surfaces in multiple locations throughout the home and beyond.

Q: How might a central computer impact today’s digital home?

A: In today’s digital home a network binds together heterogeneous devices, which in turn are connected to screens, using common protocols such as TCP/IP, HTML, UPnP, and many media formats. In the central computing home, a single computer could be connected to many screens with local input devices. The central computer could be configured to see network devices, peripherals, or the web in a way that provides a personalized experience and uniform access on multiple screens. The benefits of centralized management are as described in prior entries in this series.

Q: How would the operating system of a central computer differ from that of a personal computer?

A: A central computer would require an OS with support for multiple concurrent user sessions on multiple screens, and able to manage personal and shared devices and storage. The OS could allow multiple instances of the same application to run in accordance with the license rights of each application. Concurrent user sessions might be fully virtualized for additional robustness. User settings, device connectivity, and web access could be centrally configured and customized for each user. Access could be restricted protecting private data or blocking unwanted or inappropriate content on a user by user basis.

Q: How would the applications of a central computer differ from those of a personal computer?

A: Applications could support environments from the living room to the desktop to the handheld. Imagine applications which provide a different interface depending on the screen size and its associated usage. We could manage our movie rental services while sitting at our desk, then browse and enjoy them while sitting in front of the big screen with an appropriate interface for each. We could install a game once and use it on each screen, in the living room, bedroom, or office. We could configure our and social media software at our desk and enjoy updates and shared photos and video in our living room. The central computer could benefit from standardized living-room appropriate input devices to provide a better interface to big-screen applications.

Q: How is the central computer concept different from a home file or media server?

A: A home server stores, serves and streams files to heterogeneous devices using standard protocols. It does little computing. A central computer could provide all of the compute capability and connectivity required to deliver a complete and powerful experience on each screen without those heterogeneous devices required to play back content on the remote screen. A central computer in this example is not a media server, it is a complete media and productivity experience delivered to each connected screen. Home storage could still benefit from a media server which intelligently and securely stores, archives and shares with the central computer and remote, web-based users.

Q: What are your assumptions about media access and digital rights management?

A: Two models: Local content and web-based content. I personally believe that services which provide online, web based viewing will supplant broadcast models, save for remote locations which lack broadband. Web content may be streamed, rented, or downloaded. Digital terrestrial and Satellite content could provide a good and adequate baseline of broadcast content. The central computer could provide full access to complex and evolving web-based content and be well prepared to support evolving media standards because, like today’s PC’s, it employs the flexibility of software to accomplish these tasks.

Q: Tell us about “uniform access” to content? Why is it important?

Today’s set -top media players and media-enabled game consoles have their own interfaces, their own ways of organizing content, and their own content support limitations. With a central computer, content access could be uniform. If you like a particular media environment, you could run it consistently on each screen in your home. Media compatibility might be limited only by the capabilities of the broad offering of media playback software available. Local content could be stored wherever, on network attached devices for example, but the central PC could provide uniform access and recognize that storage in a uniform fashion.

Q: How does a central computer change the gaming experience?

A: A central computer will be ready to play games and share them throughout the home, unlike today’s consoles and PCs which are bound to a single location. My sense is that gaming is moving quickly to digital content distribution – no need to buy duplicate hardware to run a game on each screen when we can purchase it once and run it on every screen. Also, with a central computer we might have ready access to games rendered remotely, on the web, providing a state of the art gaming experience without state-of-the art gaming hardware. PC games need no longer be bound the desktop – they could be available on every screen, big or small, sitting or standing.

Q: What is the relationship between central computing and cloud computing?

A: A central computer could provide uniform access to the cloud from many rooms in our home. It could provide the ability to ingest and interact with rich content from the web expanding the possibilities for the richness of the experience we enjoy from the cloud. Essentially, powerful web-browsers, media players, and plug-ins could be configured once and extended throughout the home, providing a powerful interface to the web and the resources in the cloud.

Yet, by having a powerful local resource, I could create my own local outpost for “the cloud” – a “home cloud.” I could serve games to my friends far away and play against them simultaneously in more than one room. Receive, store and manipulate information from the cloud from any room knowing that the data is in the same physical location, but easily accessed wherever I am. If I am away from home, I might easily access my information or even applications on my central computer which has been configured once for the task. My data could either be in the cloud or on my central computer. It could always be available.

Q: When do you believe we will see the first central computers? Why?

A: I think we are closer than we think. I believe there are a combination of likely events that will bring us to the verge, and some software and solution development which will then push us over the edge. I believe that the date range for these innovations and solutions is 2010-2015. This will be the subject of future entries. Much of the proof of concept already exists in the homes of today’s enthusiasts who endeavor to bring the worlds of computing, electronics, and entertainment closer together.

This is the third in a multi-part series.

<<– Click Here For Prior Entry  Click Here For Following Entry–>>

Simon Solotko is a Senior Advanced Marketing Manager at AMD. His postings are his own opinions and may not represent AMD’s positions, strategies or opinions. Links to third party sites are provided for convenience and unless explicitly stated, AMD is not responsible for the contents of such linked sites and no endorsement is implied.

The fate of the second is tenuous and at risk. It is the centralized group assistant. It resides in our homes and offices, unifying the interfaces and screens therein. It is a repository of everything shared and will offer high intelligence, connectivity, and interactivity without the strict size, power, and ergonomic constraints of our smaller decentralized assistant. It is the “central computer” asserted by Futurists of the 20th century and it is at risk of a priori [before the fact] extinction. A fascination with aggressive, small and highly impendent devices is depleting the intellectual effort needed to advance powerful, shared, stationary ones. The fate of the central computer is in your hands.

- ”Inez Drew”

Inez suggests that we may have a choice, an opportunity to fulfill the promise of a powerful, shared computer that brings into harmony the people, screens, surfaces, and interfaces of our home. The evolution of today’s “desktop PC” into the “central computer” of the future is a high charge. But if it does not occur soon, the desktop PC risks losing its relevance in Darwin’s race to smaller and more nimble devices.

I offer a metaphor for the evolution of the PC. It was invented to make the power of computing useful to the individual. It succeeded. But individuals move around, so it shrank so that it could fit into our pocket or backpack. It developed a powerful wired network. Later, it learned how to speak over the airways so that as we moved from place to place it could retain access to the shared knowledge and social structures of humankind. These portable devices evolved along several paths each filling specific needs – the media player, the smart phone, the laptop – but they are converging and ultimately will converge to a single device, if we are to believe Inez.

The challenge is to undo the digital knot, an ease-of-use chasm created by computing devices which do not share common services, configurations, interfaces, capabilities, or network status. Inez suggests a centralized group assistant which is able to provide a uniform and powerful experience which can be shared within and outside the home. I suggest that the PC is poised to take on this role of the central computer, sooner than we may think. This evolutionary path is not without challenges and dangers, yet I have come to believe, after much thought, that this idea is a catalyst of change.

Will the PC still tethered, sitting watching the evolutionary progress of its portable offspring, have a second successful evolutionary path? That, Inez states, is in our hands. Her hypothesis is that in a future state, a central computer will bind our home together, joining together the technology deployed throughout and the occupants living therein. It will be secure, reliable, connected, powerful, able to rescue the information of our decentralized clients lost in a cafe in Bali. It will be our local outpost for the “cloud” and serve as a powerful but secure shared computing resource cataloging and interconnecting our shared digital memories from the present to the distant past.

Without such a change, I fear the digital home will stagnate while the desktop PC becomes a candidate for the endangered species list. I believe that the evolved PC must evolve into a digital nexus, a centralized group assistant instrumental in simplifying ease of use for our entire home computing and entertainment experience. The data is a flashing red light – the smaller devices are rapidly out-competing the desktop for share of wallet and share of mind. I suggest that a shared objective, a future state which directs our thought, our design and engineering will help speed the transformation before it is too late.

This is the second in a multi-part series.

<< –Click Here For Prior Entry || Click Here For Next Entry–>>

Simon Solotko is a Senior Advanced Marketing Manager at AMD. His postings are his own opinions and may not represent AMD’s positions, strategies or opinions. Links to third party sites are provided for convenience and unless explicitly stated, AMD is not responsible for the contents of such linked sites and no endorsement is implied.

-”Inez Drew”

Has the muse told us no more, and no less than exactly what we needed to hear? Seeking out a catalyst of change, let us put aside today’s reality and ask how the ideal digital home should be experienced by ourselves, our families and friends?

In a departure from the “anytime, anywhere” vision of the internet, I suggest we focus on “experienced by anyone with ease”. While I wish to access stored knowledge and entertainment whenever and wherever, I want a daily experience that is simple and fluid, not diluted with the navigation of different technologies, interfaces, and navigational paths. When I enter my home, all applications and information are available on every screen, available to everyone in my home. Our experience – the consistent way in which we interact with stored knowledge, entertainment, social spaces, and applications – is configured once, in one place, accessed and enjoyed in every place. I want a singular compute resource able to power my experience wherever we are, with a consistent connection and navigational path to personal, shared, and web resources. I want to customize my experience so it is different from others, and create capabilities that can be shared with family and friends, broadcast to wherever we are. I wish to maintain privacy while blocking unwanted content and threats, creating an environment that is secure and safe regardless of which room, screen, or interface employed.

Information and Services are Secure and Available

Configuration is Uniform and Ubiquitous

My Experience is Personalized and Portable

A Shared Experience Creates Community Knowledge and Entertainment

Here are concrete examples of the experience that I seek. Any video can be played on any screen. Any application I own needs to be installed only once, configured once, and available to my entire family. We can navigate to information and applications by the same path no matter where we are, independent of device or physical location. If we have a new peripheral such as a printer or drive, I can install it and we can access it, in the same manner, from anywhere. When my child walks up to any screen, they have access only to the subset of data, applications, and the web that we have designated. When I walk into the home, my portable devices and my home devices act as one, fully synchronized. We can play all of our games on every screen, big or small.

Now that we have the technical means to solve usage problems individually, we can focus on how to make them work together in daily life. Easier to setup, share, and extend. Customizing our experiences and extending that experience wherever we are. Yet, the proliferation of devices, software, and web applications has moved in the opposite direction, each device with its own user interface, settings, capabilities – its own experience.

To turn the tide in the digital home may require a breakthrough innovation, or a novel evolutionary turn which tends toward the unification rather than the fragmentation of our everyday experience. Where is our sword? Our catalyst of change? Are they close at hand and close to home, or far from reach?

This is the first in a multi-part series. The second has now been published and you can continue by clicking here –>>

Simon Solotko is a Senior Advanced Marketing Manager at AMD. His postings are his own opinions and may not represent AMD’s positions, strategies or opinions. Links to third party sites are provided for convenience and unless explicitly stated, AMD is not responsible for the contents of such linked sites and no endorsement is implied.

Previously, I wrote a blog on What AMD offers the HTPC customer. It covered the MSI Media Live Diva platform (MSI 7411), which is produced in accordance with the AMD HTPC motherboard specification that we affectionately call “Maui.” I discussed the audio and video capabilities of the platform and some of the features that make it a little more unique in the HTPC space.

Today, I would like to offer a little more insight to this platform and show you just how much this platform can be customized. AMD, D2Audio and MSI worked hard to deliver a unique solution to the market. However, the work did not stop just because the platform was released. We have continued to innovate on this platform and we are quickly approaching the next phase of this solution.

One of the unique properties of the D2Audio designed chip is that it is programmable. Therefore, the firmware (f/w) of the audio cards can be updated to add new features and functionality. In some respects, this is similar to how a motherboard BIOS can be updated to add new CPU support or additional functionality.  With respect to the D2Audio chip, it can be customized to overcome the weakness of a given speaker, customized frequency response curves, customized crossover frequencies, etc. 

Well, D2Audio has taken the next step and is bringing some of this programmability to life to help enable our System Integrator partners to take full advantage of many features of the D2Audio DAE-3 chip. At the time of this posting, it has yet to be determined how to make some of these things available to the DIY user, but it is under discussion.  What I am hoping you take away from this blog is just how powerful and robust this unique platform is and how much it can be customized to meet a user’s needs.

In this particular case, words won’t quite do it justice so I am including some screen shots of a D2Audio tool called Audio Canvas^TM.  Audio Canvas^TM is an application that has the “buttons and knobs” that control the programmability features of the D2Audio chip. 

Now, enough talk; let’s take a deeper look inside the “Maui” platform’s audio features enabled by Audio Canvas^TM.  Below is a view of the Audio Canvas^TM control panel. It represents the signal flow of audio though the DAE-3 chip and the control blocks that can be optimized.  (Click on images to enlarge)

Audio Canvas Control Panel

As you can see from the picture above, with the control panel there are tonal adjustments, 5 band parametric EQ, Matrix Switcher, High Pass and Low Pass crossover filters, Channel Router, Master Volume, Loudness, Compressor and individual channel volume. It should be noted that many of the controls you see here are available on each channel independently.  Therefore, you can adjust each audio output (Left, Right, Center, etc.) independently of the others. All of this happens in real time; no need to recompile- make a change and you hear it immediately from the speakers (assuming you have content playing back as you make adjustments). Here is a closer view of some of these controls.

The images above show the tonal control response curve (left) and the 5 band parametric EQ response curve (right).  On the Tonal control panel, there are 4 knobs used to control the frequency response and gain (volume) for the bass and treble frequencies.  Rotating the knobs will change the frequency response and graph below the knobs. On the parametric EQ graph, there are 5 bands that can be adjusted for both gain (center green dot) and bandwidth (pair of green dots).  Furthermore, the EQ has a summation effect where the bands can be added to increase the gain by setting the centering point on each band to the same frequency.  This would allow you to boost the bass response in one channel, for example, or filter out a bad frequency that might be distorting.  You could also use these controls in conjunction with your speaker’s response curves (contact your speaker manufacturer) to optimize the audio outputs to your speakers.  Likewise, if you have a mixed set of speakers (for example, different surround sound speakers from your main left and right), you could adjust the audio outputs on a per speaker basis. Response curves shown are not necessarily recommended settings but purely an example to show some range of control available.

In the image above, you see how to set High Pass and Low Pass crossover filters. The panel provides control for the type of filter, in this case a Butterworth Filter, but there are Bessel and Linkwitz-Riley filter options as well. There are also settings for both the slope and the cut off frequency. The shaded blue area represents the frequencies being filtered out.  By using both a low and high pass crossover filter it is possible to create a band pass filter if so desired.

  The image above shows how the router can be used to remap the channel outputs.  This is useful if you wanted to do a multi-zone environment where instead of 5.1 speakers in one room, you might have 3.1 in one room and 2 more speakers in another room. 

Above is the Compressor/Limiter.  This is useful when you have content that was encoded at different volume and/or gain settings.  With the compressor, you can set a threshold and then automatically increase or decrease gain based upon the threshold setting and the ratio.  Factors such as the attack and release are used to determine how fast it should ramp and release the gain.

Lastly, there are three different points in the control panel (next to the EQ buttons, LP buttons, and independent volume buttons) where you can open up a VU/Level meter to monitor the signal level at each point to ensure that you have the appropriate headroom as you make adjustments.

As you can see, the Audio Canvas^TM application is more of a tool for engineers, system integrators and/or audio enthusiast and not something for the everyday user.  However, what this represents is just how much control an individual can exert over their audio environment when using the MSI platform with the D2Audio chip on board.  Furthermore, this new firmware enables the hooks necessary for programmers to develop their own user interface to control the audio experience.  As mentioned in the earlier blog, the audio characteristics offered on this platform are certainly impressive on their own- combine such performance with such programmability and you have the makings of a very unique solution indeed.  It is just another one of those things that set this platform apart from other HTPC solutions on the market.

Till next time, Happy Trails!

Jay Taylor is a Senior Developer Relations Engineer at AMD. His postings are his own opinions and may not represent AMD’s positions, strategies or opinions. Links to third party sites are provided for convenience and unless explicitly stated, AMD is not responsible for the contents of such linked sites and no endorsement is implied.

One solution being offered by the US Federal Communications Commission is a digital-to-analog converter box that receives over-the-air digital signals with your antenna converts them to analog and sends the signal to your television. This will allow you to watch Digital free-to-air television on an analog TV. In any case, these digital-to-analog converter boxes are primarily intended for standalone TV sets, and may not be well suited for PC use.

It’s not often that we see a huge technological shift that affects each and every American-from those who have never turned on a computer to the most diehard tech enthusiast. For AMD, and in particular, for those with a history in our graphics team, talking about TV encourages us to look back at our own company’s history in changing the way people watch television.  It was 13 years ago, in 1996, that ATI Technologies (now a part of AMD) released the ATI All-In-Wonder^TM, world’s first combination graphics and TV tuner card, giving consumers the ability to play early PC games and watch television on their computer. This paved the way for a series of innovative TV on PC products from AMD that let consumers program and record their favorite TV shows (long before the word TiVo became a household name) and receive free over-the-air TV signals for budget-friendly, high-quality home entertainment.

The newest addition to AMD’s TV-on-PC roster is the just released ATI Theater^TM HD 750 which brings HDTV and digital video recording (DVR) capabilities to desktop and notebook PCs using free-to-air broadcast signals without the need of a converter box. With DTV signals reaching 98% of the US population, anyone can gain access to their favorite hit shows, live sporting events, and a variety of local programming from the major US broadcast networks.  And because we know that watching visually intense shows like Heroes and Lost demands only the best in picture quality, AMD has made further tweaks to the video processing and signal reception technology to help you see clearer, crisper and more vibrant images than any of our previous generation of PCTV products.

AMD has also worked with our technology partners to offer this chip in a variety of form factors that make it easy to add on to existing systems-including: a plug and play USB “stick” that could connect to a laptop computer; a mini PCI Express Card that will fit into a sleek home theater PC in the living room; and the more traditional PCI Express board that fits well in the home computer. For those looking to upgrade to a new laptop or desktop computer with TV tuner capabilities built into the box, stay tuned for anticipated product launches from major manufacturers later this year.

What also makes this product unique, is that it is our first TV tuner that is compatible with both digital and analog TV signals from around the globe-so you could potentially take your laptop on a trip to Hong Kong, power it up and be able to pick up the local free-to-air broadcast. AMD is prepared not just for the US digital transition but also for the global digital transition. Planned broadcast transitions include: October 2009 in Denmark, April 2010 in Spain, July 2010 in Estonia, August 2011 in Canada, January 2012 in Hungary and Romania, December 2012 in Bulgaria and Italy, with many more just around the corner.

Ultimately, the ATI Theater HD 750 is all about bringing affordable and high quality TV watching to PC owners everywhere.  Whether you are a college student who needs a less expensive alternative to cable or a condo owner looking for a space friendly way to add a second TV to the house, the ATI Theater HD 750 really does have something for everyone-especially those who don’t want to be left in the dark when their old school rabbit ears won’t cut it anymore.

Shane Parfitt is Product Marketing Manager, PCTV  Group at AMD. His postings are his own opinions and may not represent AMD’s positions, strategies or opinions. Links to third party sites are provided for convenience and unless explicitly stated, AMD is not responsible for the contents of such linked sites and no endorsement is implied.

By now you may have already heard some of the exciting news for the HTPC space over the last few weeks. However, in case you had not, let’s spend a little time talking about it here.

Last week Hulu announced a desktop application that allows you to use a standard Media Center type remote to navigate and view content on Hulu’s website. Now, instead of the traditional mouse and keyboard interface in a two-foot environment to navigate the Hulu website (think watching Hulu at your desk on a computer monitor), you can now launch this desktop application while using your Windows® Media Center Edition remote  in a 10-foot environment (think watching Hulu from your couch on your big HD screen). Adding this so called “Lean Back” interface technology is a big step for Hulu in making it easier for consumers to access and watch content in a much more user friendly environment. This experience can even be integrated into Windows Media Center Edition by using something like the MCE Menu Mender application so you can launch the Hulu application from inside Media Center Edition instead of the desktop.

Earlier this week, YouTube announced YouTubeXL. This is another 10 foot UI for YouTube content. While Hulu chose to release an application enabling the 10 foot experience, YouTube chose to launch a website that provides the 10 foot navigation.  In either case, this is great news for consumers that want to enjoy content from their couch instead of sitting and staring at a desktop or laptop computer screen.

But it does not end with Hulu and YouTube. A couple of weeks ago, Microsoft announced that they have teamed up with Netflix to support integration of Netflix functionality into the Windows Vista® Media Center application. While you could always do this via a 3rd Plug In application, what makes this interesting is that Microsoft recognizes the need for easy access to more content and is taking steps to make that happen.  Now, Microsoft has not yet (at the time of this posting) integrated Netflix functionality into the upcoming Windows® 7 platform.  I can’t speak for Microsoft here, but I would expect them to offer this in Windows 7 as well given that they just launched it in Windows Vista.

These are exciting times.  The role of PC technology in the home is constantly changing for the better.  As content owners and distributors integrate more 10-foot user interface (aka Lean Back) technology into their distribution model and as Microsoft further integrates those things into their Media Center application, the usage model and viability of the HTPC type platform increases.  The industry is rapidly changing, bringing more content to the consumer in ever easier ways to navigate and enjoy that content.

So, tell us what you think about these industry changes.  Are you taking advantage of all the content out there? Are you finding it easier to access this content? What do these changes mean to you? Du Yu Hulu?     

Till next time, Happy Trails!

Jay Taylor is a Senior Developer Relations Engineer at AMD. His postings are his own opinions and may not represent AMD’s positions, strategies or opinions. Links to third party sites are provided for convenience and unless explicitly stated, AMD is not responsible for the contents of such linked sites and no endorsement is implied.

My first job at AMD was as a Support Engineer helping customers with our networking products.  Back then, I was dealing primarily with engineers at companies like Cisco, Netgear, and even the federal government that used AMD’s networking chips at the time.  After a while, I took on the role of CPU support engineer and eventually I supervised the whole North America support team.  One thing I quickly learned is that there are a wide variety of support issues out there and no matter how well trained you might be, no one knows everything.  It is important to have variety of resources available when you need that next level of support.

The Internet has become a great resource for getting support, sharing ideas, researching products and so much more.  Forums, blogs, support sites, web review sites, the list goes on and on.  There is almost limitless information out there that can greatly aid you in your endeavors. 

To ensure we are all on the same page, let me provide a brief explanation on terms I am using. 

Forums are community message boards where members can interact, and post questions/answers to other members.  These are typically user to user environments.  They are often organized by topic and in many cases free to join. Some forums may be regional in nature (language, etc.) while others are more international.

Blogs (like this one) are typically limited to a few (or even a single) author writing about various topics. They may be informal experiences or formal guides on a specific topic.  It is usually one way communication but often also allows for comments that may or may not be addressed by the author. 

Support sites are typically the official communication channel back into the manufacturer for any support related issues.  They may include email forms, telephone support numbers, knowledgebases and FAQs (Frequently Asked Questions) along with product documentation.  Some support sites will also have their own forums dedicated to their products. 

Web Review sites are typically 3rd party sites that independently review products in the market.  These vendors may buy hardware off the shelf and review it or be sent products from the manufacturer for review.  Review sites try to maintain an independent voice when reviewing products to maintain their credibility.

In keeping with the HTPC theme I started, I thought I would share some specific resources that I have found useful in my HTPC travels.

Some of these sites are forums (community gatherings of people with similar interests) while others are blogs (like our own blogs here) written by people that may have some level of expertise in the HTPC arena.  Sites are listed in no particular order and are a mix of Forums and Blogs. 

AVS Forum. One of the premier sites for anything audio/video related and a great resource for the HTPC.

Australia’s XP/Media Center Forum. A great bunch of blokes sharing an interest in the HTPC community in the land of Oz.

AV Forums in the UK. A great forum for HTPC and general computer related topics.

Ian Dixon’s website. A great source and early pioneer for HTPC and Home Server related topics.

Chris Lanier’s blog.  Another one of the pioneers of the HTPC space.

Missing Remote. A general HTPC resource.

HTPC Forums. A small forum community dedicated to all things HTPC related.

The Green Button. Another great resource for Microsoft’s Media Center.

Hack 7MC. Another great resource for Microsoft’s Media Center that is focused on Window’s 7.

Geek Tonic. A great resource for Sage TV related content.

Silent PC Review. 3rd party review site and a great source of info for helping keep your HTPC quiet.

If you are having difficulties with your HTPC, there are plenty of people out there willing to lend a helping hand.  Sometimes, it is just a matter of knowing where to look.

The sites listed above are just a few of the great resources and communities that can help you on your way and only begin to scratch the surface.  If you know of some great HTPC support sites and communities, please leave a comment.  I am sure others would love to hear about new places where knowledge can be shared and gained.

Till next time, Happy Trails!

Jay Taylor is a Senior Developer Relations Engineer at AMD. His postings are his own opinions and may not represent AMD’s positions, strategies or opinions. Links to third party sites are provided for convenience and unless explicitly stated, AMD is not responsible for the contents of such linked sites and no endorsement is implied.

Depending on when you read this, I will either be preparing for, in the middle of or finished with a Webcast about getting started with a Home Theater PC (HTPC) today. If it’s the first two, you can join it in action now.  And if you weren’t able to make it, I hope you’ll catch a replay.  If you’ve ever considered making the move to watching TV via the Internet a more permanent set up, take a look at our Webcast and keep reading.  I’d like to take a few moments to talk about taking the HTPC plunge.  I’ll also provide some details on where you can purchase the equipment needed to start enjoying your own HTPC. 

With the growth of online entertainment content, the HTPC puts the power of your TV experience in your hands, and I believe that it’s simple enough for just about anyone to do.  As I wrote here, my family and I took the plunge a few months ago and so far so good.  We watch what we want, when we want, and how we want to view it.  And because the HTPC can also serve as a Blu-ray/DVD player, DVR, photo library, music/DVD library and radio I’ve managed to clear a lot of clutter and wires out of the family room.

In all fairness, there are minor drawbacks to getting all your content online.  There are a few more steps involved in getting your content and you may not have access to all the same content as you do with cable/satellite.  But, happily, the choice is ours-cable+internet content, or 100% internet content.

Let’s get started …

So now that you’ve done your research and decided that a HTPC is right for you, the next step is finding out how to get content from over the air (OTA) broadcasts and through online content providers (see list here). Next, you’ll need to locate the right HTPC equipment.

For many, a turn-key solution from a system integrator or OEM vendor is the best option. It provides easy access to premium content and is easier to maintain and configure than a DIY system.  For those who may want or need a shortcut, many of the system integrators will come to you and not only install your HTPC, but offer additional services and functions like home automation.  Check out this entry for more details on getting the most from your HTPC from a system integrator (it even talks about setting up Blu-ray to play on your HTPC!). 

You may want to check out the following companies who are offering quality HTPCs with digital TV tuners as part of the package.  (To expand your content I highly recommend a TV tuner, such as the ATI TV Wonder^TM 650 PCIe® combo card.)  Below are valued AMD industry partners and you can bet that they’ll provide you top-notch products and services.

Ace Computer (Home Installer/Consumer Channel)

Aspen Media Products (Home Installer/Consumer Channel)

Colorado vNet (Home Installer/Dealer channel)

Fluid Digital (Home Installer/Consumer Channel)

Maingear Computer (Consumer Channel)

Okoro Media Systems (Home Installer/Consumer Channel)

By the way, for those of you looking for a more advanced DIY (and cordless) HTPC set-up check out my previous entry.  I list out the steps I took to cut the cord so to speak.

The possibilities for your HTPC continue to expand.  Last week, Microsoft announced that Netflix streaming is available through Media Center with Windows Vista®. And software options from AMD and others provide enhanced visual experiences for everything from media library inventory to video conversion.  And with the appropriate playback hardware and software you can use your HTPC to play back all your favorite DVDs and Blu-ray discs with just a click. 

For more tips and tricks on how to get started on your HTPC – or on how to get the most out of your existing set-up – I invite you to browse through the AMD@Home blog.  And if you have questions, feel free to leave them in the comments section. In fact, I will be giving away ATI TV Wonder TV tuners to three commenters who leave a comment here about today’s Webcast. The winners will be selected at random.*

 Till next time, Happy Trails!

Jay Taylor is a Senior Developer Relations Engineer at AMD. His postings are his own opinions and may not represent AMD’s positions, strategies or opinions. Links to third party sites are provided for convenience and unless explicitly stated, AMD is not responsible for the contents of such linked sites and no endorsement is implied.

* NO PURCHASE NECESSARY TO ENTER OR WIN. Eligibility: United States residents, 18 years and older. One (1) entry per person or e-mail address. See Complete “HTPC Webcast TV Tuner Drawing” OFFICIAL RULES for additional rules and details. [insert link to Official Rules here]. Additional restrictions may apply, void where prohibited.

You’re invited to join AMD for a webcast on Wednesday May 27 about the increasingly popular Home Theater PC (HTPC) platform, and how to achieve feature-rich television content directly on your home PCs. I will be discussing many of the issues covered in this blog, and there is opportunity for a Q&A afterwards. Please join AMD and get involved in the discussion. Full details below.

 When: Wednesday, May 27; 12:00 p.m. ET/9:00 a.m. PT

Where: http://www.livestream.com/amdunprocessed

In an earlier writing I shared my family’s experience with cutting the cord.   Overall, things are still going smoothly for us.  I have been asked several times how we did it, so I thought I would provide more details on our transition.

I realize that cutting the cord for an HTPC may not be for everyone. There are many different solutions for consuming content (both online and locally based PC content). While some have very attractive price points, they also include challenges that potentially limit the experience.  Limited storage capabilities, limited selection/availability of online content sources and lack of DVD/Optical drive, combined with the additional complexity of another box under the TV, made me realize that these scenarios just did not work for my home.  Here are the steps I took to create a cordless HTPC set up.

1 ) Selecting the right platform
Whether you buy or build, at the heart of any cord free experience is the hardware. Choosing hardware is not always about the most powerful or most expensive solution, it is about the most elegant solution. It needs to meet your expectations and those of the family (assuming there are multiple family members/users of the box). It should to deliver the full entertainment experience, yet be quiet enough for the living room.  It’s critical to evaluate your needs and what you want your box to do. 

I selected the MSI Media Live Diva board that offers great video and audio — an integrated solution that combines the functionality of several components into a single box under the TV.  This scenario provides the simplicity I want for my home. 

For my CPU choice, I went with a low power (65W) AMD Phenom^TM X4 quad-core processor.  Some may say this is overkill for a stand alone device; however I plan on expanding my media entertainment access by adding media extenders in the near future. The quad -core processing will allow me to stream content to other rooms while servicing the main HTPC needs and is still a low power processor.   

2 ) Selecting the right chassis
Previously, I provided several examples of chassis for the HTPC market space and discussed how vendors are developing technology and chassis to meet the market needs. Care should be taken to understand the requirements of the chassis while considering the look and feel that best suits your decor and budget.  Given the subjective nature of beauty, only you can determine which chassis is the right one for you.

3 ) Selecting the right software
Much like the hardware selection, choosing the software interface can make or break the cord free lifestyle. Microsoft® Windows® Media Center is one option, while alternatives include Sage TV, XBMC, Boxee and others. Each offers its own unique approach to delivering that 10-foot experience.  Currently, I am using Windows 7 Media Center (the public beta version), but the other options are certainly viable.

Another important step is loading the up-to-date drivers.  Having the right drivers installed will help ensure that all the devices are functioning normally while providing the performance needed for smooth audio and video playback.

An optional step is installing the desired plug-ins to get the most out of your HTPC.  A list of potential plug-ins was offered in an earlier blog.  

Lastly, I would suggest that once you have the box working as intended, don’t mess with it.  I have seen too many systems fail because the builder did not leave well enough alone. As the saying goes: “if it ain’t broke, don’t fix it!”

4 ) Increase your bandwidth speed
One of the first things I decided upon was to increase my broadband speed.  Whether it’s DSL, cable, FIOS or some other broadband connection, consuming video can require a fast connection for stutter free playback of video content.  I chose to spend a little more per month on the faster service knowing that it can help me not only offset, but actually save money each month by not having a paid TV service bill (see “Install a TV Tuner” below). I am using a cable modem with a 7Mbps download / 512Kbps upload plan.

5 ) Choosing a remote or wireless keyboard
There are many options to control your box.  Most controls are wireless and operate the box from a distance.  Some use infrared (IR), while others use radio frequency (RF) and still some are starting to use Bluetooth (BT) to operate the HTPC. Generally, they all perform the necessary functions. 

Choosing the right solution depends on the operating environment and how you will be using the HTPC.  A fully functional keyboard and mouse allows the HTPC to be both an entertainment device and a fully functional PC (email, web surfing, etc.).  A remote control with no keyboard/mouse can also be useful.  I am using the Gyration Media Center Remote in our home. I plan to write a blog post about the various options and the features they offer — so stay tuned.   

6 ) Online content
Online content is a big part of cutting the cord. Finding and saving those online content-rich sites is an important step.  Previously, I offered websites/sources of where you can find online TV and movie content.  I recommend that folks bookmark their favorite sites and perhaps set up folders in their browser links bar.  I set up folders according to content type (Network TV, Kid’s Programming, Specialty Channels, News Channels, etc.) and then bookmark the sites in each folder.  This makes it easy to find the site and content that our family likes to watch. 

Note: Some online content providers require the installation of proprietary players. Be sure to have the right playback software installed so you can enjoy the online content of your choice.  

7 ) Install a TV Tuner
To me, the TV tuner is an integral part of the HTPC experience and another one of the strengths of the HTPC.  By combining the online content with the Over the Air (OTA) broadcasts, I really do get the best of both worlds.  Now, not all areas of served with many local broadcast stations, but if you do happen to have a robust OTA market, a TV tuner can really expand your access to content.  Alternatively, some TV tuners can tune in clear QAM channels (unencrypted digital cable content) broadcast by your cable provider. Contact your local cable operator to find out just how many clear QAM channels they provide. In my case, I went with our ATI TV Wonder^TM 650 PCIe® combo card. Paired with a home made antenna, I get great local digital TV reception and no monthly fee.

8 ) Install DVD or Blu-ray drive
Adding a Blu-ray drive into the HTPC integrates one more device and one less box/remote under the TV.  With an integrated drive, when used with a software playback application like Arcsoft’s Total Media Theater or Cyberlink’s Power DVD, you can enjoy DVD and Blu-ray movies without the need for a stand-alone player (don’t forget that an HD monitor is required). It really simplifies the overall usage model and removes the added cost and complexity of a separate player.

9 ) Setting up a network
Given that you are trying to cut the cord, online content is likely to play a major role in your viewing habits.  Unfortunately, the broadband pipe coming into the home may not be in your living room, so you may need to set up a home network to access the content from your HTPC. Now, don’t panic as this is really not as hard as it sounds. 

In my home, I don’t have an Ethernet (wired LAN) port in my living room, so I set up a wireless network to connect to the internet and download/stream content from the web to the HTPC. A wireless 802.11g  (a.k.a. wireless G) network may or may not work well for you depending on how much traffic is routinely on your network.

To ensure I had enough network bandwidth to service all the PCs in my home along with the HTPC, I opted for a D-Link® 655 802.11n router (a.k.a. wireless N). Now, we have plenty of network bandwidth available for the HTPC to stream content from the web without dropping frames.  My new router also supports QoS (Quality of Service) which allows me to set priorities for different types network traffic or give priority to certain devices on the network (like the HTPC). Don’t forget to secure your wireless network during set up.

10 ) Break out the snacks
Once your HTPC is set up correctly, break out the popcorn or your favorite snack, sit back and enjoy all the content from the comfort of your couch.

So there you have it – how I eliminated my paid TV services and moved to an OTA and Online TV model.  While we may not get all the exact same content we had before, we now have access to a wide variety of new content.  And I think it shouldn’t take long for my monthly savings to cover the costs of what I spent to switch to this new entertainment model – although, as they say, your mileage may vary.

If you have an experience to share, please add your own personal story in the box below.
 

Till next time, Happy Trails!

Jay Taylor is a Senior Developer Relations Engineer at AMD. His postings are his own opinions and may not represent AMD’s positions, strategies or opinions. Links to third party sites are provided for convenience and unless explicitly stated, AMD is not responsible for the contents of such linked sites and no endorsement is implied.

One of the major changes in the HTPC market segment and certainly one of the most visible has involved the chassis solution.  In the early days of the HTPC market, chassis options were very limited and were most often just traditional PC chassis painted black and placed horizontally on the shelf.  The chassis still looked and felt like typical tower PC chassis and as the saying goes “You can put lip stick on a pig, but it is still a pig.”  Now, this is not to say that the today’s tower PC is ugly by any means. I think there are very attractive tower and traditional PC chassis designs; I just don’t think they make for very good HTPC chassis solutions.

Aesthetically speaking, these solutions never really fit the room decor and they certainly did not match the rest of the consumer electronics (CE) components in the same cabinet. To make matters worse, they were often too big and bulky to fit on any shelf and were typically very loud with all the high speed fans whirring away.  Do you really want to listen to the hum of the fans while trying to listen to the subtle dialog of a movie?  As you may guess, this could certainly hinder sales of an HTPC into the consumer market.

My, how times have changed…
Today, there is a great variety of chassis solutions to choose from with designs and prices that cross the spectrum. One thing they all have in common is that they were designed to look and feel more like AV (audio/video) or typical consumer components than traditional PC products. Furthermore, the chassis vendors have tried to take thermal conditions (think chassis airflow) and noise levels (think larger and/or quieter fans) into their design considerations. These vendors have spent a great deal of time conducting thermal studies to understand how best to manage airflow and heat dissipation. These studies have also included acoustic chambers to measure noise levels of the chassis designs. 

In some cases (no pun intended), the chassis vendors have integrated an infrared (IR) sensor and remote control.  This lets you take advantage of the 10-foot environment and operate the system from your couch.  In addition to the integrated IR sensor, some chassis have an integrated display (LED or VFD) similar to those found on a DVD player or AVR and, on the higher end units, a touch screen display to provide more info to the user.  This might include information about the media content (music or song title, DVD title or chapter, TV channel, etc) or system related info (available memory, network bandwidth, available storage, etc.) 

To further improve the usability, most chassis will offer some level of front panel input and output connections.  These may include USB ports, Firewire ports, Card Readers, Headphones/Mic jacks and more. 

This is all good news for the HTPC customer because they are getting products designed specifically to meet the needs of this market segment.  There are plenty of chassis to choose from allowing for differentiation and varying price points.

Below I am including pictures of some of the various chassis solutions. Each of these vendors offer a wider selection of chassis than is shown here, so be sure to visit their websites for more details on these and other products.

Note: These chassis are displayed in alphabetical order according to vendor and should not be viewed as a prioritized list. Likewise, this list is not all inclusive as there are more vendors and chassis than shown here.

Antec

Micro Fusion Remote 350

Fusion Remote 430

GMC 

AVC-S1

AVC-S7

The GMC chassis shown both have very CE looking design style with tactile feel for the buttons, integrated display, IR sensor and remote control.  The AVC-S7 on the right is a very low profile design and supports a slim line, slot load DVD player.  

Lian Li

C-39

C-36

nMedia PC 

H1000S

H5000S

nMedia PC offers various solutions that have  USB ports, Firewire port, an eSATA port and card reader up front with a drop down door along bottom edge.  These models shown (H1000 and H5000) are mid profile chassis that have room for an optional display (in the black stripe area on the right).

Silverstone

GD02 MT

GD02

Silverstone offers this unique chassis design (GD02) with and without a touch screen.  It is also not quite as deep giving it a little more room to fit shallower shelf depths.  They also offer various I/O options up front with a drop down door along with IR sensors and a remote control.

Thermaltake

DH101

DH102

Thermaltake offers their DH10x series with integrated touch screen or LED display and IR sensor along with remote control.  A brushed two tone finish gives it a very CE like appearance.  Being taller in design, it can take either an ATX or uATX board solution. 

Again, these chassis shown are just some of the options available with plenty more to choose from.  As you can see, today’s HTPC chassis are attractive and effective solutions that look and feel more like CE equipment.  There are a wide selection of chassis solutions to choose from, each with its own style.  Prices range from the entry level to the high end giving consumers more choice to find a solution that fits their budget and their decor.

Till next time, Happy Trails!

Jay Taylor is a Senior Developer Relations Engineer at AMD. His postings are his own opinions and may not represent AMD’s positions, strategies or opinions. Links to third party sites are provided for convenience and unless explicitly stated, AMD is not responsible for the contents of such linked sites and no endorsement is implied.

Up until now, I have tried to provide a high level overview of the hardware and software changes that have taken place over the past couple of years that are making the Home Theater PC an interesting platform. So, is the HTPC really ready for a larger audience?  It is difficult to say what makes a platform move from a niche segment to the mainstream consumer platform.  Certainly the degree of difficulty in setting up and using the product is one factor, while cost may be another.   However, I thought I would share a little of my personal experience with the HTPC as a user and not as an engineer.

In these trying economic times, consumers are carefully watching their expenditures and spending their money where they believe they can get the most bang for their buck.  Like the rest of you, I have taken a hard look at my own monthly expenditures trying to find some ways to save a little more ca$h.  This is where my HTPC comes into play. I have been working on these types of platforms for a couple of years now and I think technology and content are finally coming together to open this system up to a larger consumer audience. 

Jumping In

Now, I know that some of you may be thinking: “You’re an engineer. You can solve problems if something goes wrong with it, but the mainstream consumer may not be able to“.  Let me assure you, that while I may be more technical, my family is certainly less so.  Now, I may catch a little heat over this from my family (love you guys!), but they can be very vocal when things are not working quite right.  I do a fair amount of traveling internationally and therefore, I am not always around to fix things if something breaks. For example, while on business in Taiwan I’ve been awoken at 3 am by an upset voice on the other end telling me in a polite but exasperated manner that “The doohickey isn’t clicking the way it’s supposed to and instead it’s making a thumping/gurgling sound so I can’t watch what I wanted to and you need to fix it now!“.  So, I learned a while back that if I don’t want to sleep on the couch or get the evil eye from my children, I should probably not make my family test subjects and I should NEVER mess with their entertainment experience. 

However, with all the recent changes taking place in the industry, I finally felt sufficiently at peace that we could make some changes in how we consume content in the home.  About 3 months ago we took the steps to cancel our satellite service and get content strictly from over the air (OTA) broadcasts and through online content providers (see list here).  There was certainly a little concern expressed on behalf of my wife and kids, but we tried it anyway.  So far, things have been going pretty well.  We have not had any blue screens, lock ups, or major problems at all.

End Result

There was a little bit of a learning curve that was needed, but soon everyone started to get the hang of this new thing (affectionately called, “the box”).  Then as we discovered new sources of online content, I saw ever so slight smiles. Then those smiles grew as they started to realize the possibilities. No longer were they tied strictly to the time when a show was broadcast. No longer were they limited by the amount of DVR storage that our satellite provider gave us with their box. We now have more freedom to watch what we want, when we want.  They have come to not fear the new box under the TV, but instead are starting to embrace it. Well, they are not REALLY hugging it, but they are seeing that it is not all that hard to use and in many respects, operates in a similar manner to our previous satellite box. 

Sure there may be a few extra steps to get to the online content, but even that is starting to change.  The kicker here is that since I built the box from scratch, there was no instruction manual, yet my wife was able to quickly pick it up without much guidance from me. This was a big deal for me because my wife loves instruction manuals and micro organizing. We have a big binder full of instruction manuals (really, I’m not exaggerating). We even have one from an answering machine we had 15 years ago.  So, it was great to see her jump in and start using it (honey, I am so proud of you!).

Now, this did not all come without some sacrifice.  We don’t have access to all the exact same content we could get from our satellite provider.  There are some shows we just can’t get, at least not yet.  However, for all that we lost, we gained significantly more content.  Sure, this content was out there and we could always watch it on our desktop PC, but do you really want to crowd around a 19″ computer monitor sitting at your desk to watch your TV programming?  I know I don’t.  Our HTPC gives us access to all that content and that experience but from the comfort of my couch. In addition to all that, the HTPC is our:

• Blu-ray and DVD player
• Digital Video Recorder (DVR)
• Photo Library
• Music Library
• Internet Radio
• DVD Library
• Amplifier
• TV Tuner

Just one box and one remote — it works great for us.

Between the two ATI TV Wonder^TM HD 650 Combo PCI Express® tuners I installed, we can watch and record multiple programs at the same time. For shows we may miss or are not broadcast on OTA TV, we go online to watch.  To top it all off, we are saving about $100 per month by cutting the cord (or in our case, the satellite feed).

I can’t say if it is right for you or your family, or if you would save as much as we do, but perhaps it is time to take a look.  If you have an interesting story or thoughts about your HTPC experience, please leave a comment, we would love to hear what you have to say.  You can read about the steps I took to cut the cord here. Likewise, if you have a topic you would like to see covered in a future blog, let us know. 

Till next time, happy trails!

Jay Taylor is a Senior Developer Relations Engineer at AMD. His postings are his own opinions and may not represent AMD’s positions, strategies or opinions. Links to third party sites are provided for convenience and unless explicitly stated, AMD is not responsible for the contents of such linked sites and no endorsement is implied.

I have mentioned in previous posts about various Plug In applications you can get that can add functionality and value to your home theater PC. This time, I thought I would share a few that I am currently using and provide a list of several more that exist.

However, before jumping into things, let me first explain a little about “plug-in” applications. As I had discussed in the What Can a Home Cinema/Home Theater PC Do?, Microsoft has developed a very nice application called Windows® Media Center. Windows Media Center provides some great functionality that allows you to enjoy much of your favorite content from the comfort of your couch. However, the very nature of the HTPC makes it very flexible, allowing it to do so much more. As such, Microsoft has enabled tools that allow software developers and others to write their own applications that “Plug In” to the Windows Media Center application. Once installed, most of these applications can be launched and used from inside the Windows Media Center almost as though it were part of the original application. In some cases, the plug-in might run in the background or reside on the desktop to make the Windows Media Center experience better.

The availability of plug-ins has enabled professional software vendors as well as individual software programmers to write a variety of applications that can enhance the overall functionality of your HTPC. There are applications that let you organize and store your DVD collection onto your HTPC, allow you to shop/bid on sites like eBay, provide localized, national and international weather updates, plus a lot more.

Below are some screen shots from My Movies and MCE Weather to give you an idea of the different types of features that can be added to your HTPC.

Movie Collection View

Forecast View

One thing to note about plug-ins is that while many of these are free, most of the developers do accept donations as they do spend a great deal of their free time writing and debugging these applications. If you find one you really like, consider making a donation to show your appreciation and support for the developer. Other plug-ins are fee based but may offer a trial version. Lastly, some plug-ins have specific hardware or software requirements, so it’s important to check the requirements before downloading and/or installing the application.

Below is a list of various plug-ins that I have collected with the help of folks on various forums. Again, this list is not all inclusive nor should it be considered a “recommended” list — it is just a sampling of some of the plug-ins available today.  Most of the sites below will have screen shots and detailed information about their application.

VMC Netflix
vmcNetflix is another Netflix oriented plug-in to manage your Netflix subscription.

My Movies Plugin
Shown above, index all your DVD movies automatically, browse, read about and watch your movies, etc.

ArcSoft TotalMedia™ Theatre (Fee based)
This is a great plug in for Blu-ray and DVD playback. The software supports multiple audio/video formats (Blu-ray or DVD Drive required).

Web Guide 4
WebGuide allows you to remotely view live/recorded TV programs as well as manage your recorded television programs. Offers remote access from any machine that has a web browser an internet access, including mobile devices.  This currently only works with Windows Vista®

Secondrun TV Plugin
Here is a nice plug-in that brings Hulu to Media Center. This is an early release and still a work in progress, but it is a great start.

My Channel Logos for 7MC
Here is a nice plug-in that allows you to add channel logos to TV channels in the EPG (Program Guide).  It is limited to Microsoft’s Windows 7 at this point in time.

MCE Google Calendar
Plug-in for adding Google calendar to Media Center.

Video Browser
Plug-in that provides a simple interface to your videos, movies, and TV shows.

Media Browser
Media Browser is a free media aggregator plugin for Media Center that takes your recorded, digital, or ripped media and presents it in a simple, easy to use interface. Media Browser prides itself on delivering a fast, intuitive, media rich experience for the whole family.

MC Shoutcast (Fee based)
mcShoutCast adds internet radio to your HTPC. +13,000 stations at your fingertips, save your favorite radio stations. Top 500 Station list shows you the hottest stations.

Music Browser
Music Browser is a Vista Media Center application which allow for folder based navigation of your music files, ditching the need to have the Artist and/or Album Artist tagged correctly in all of your files.

MCE Buddy
MCEBuddy is a file compression tool to make large TV, Video, etc. files smaller, saving disk space. It can also remove commercials from recorded TV shows.

MCE Weather
mceWeather shows weather for your region on your TV or PC. The plug-in provides data from all over the world. It shows the forecast for the next days and also shows you a satellite image of your country.

My TV to Go (Fee based)
Easily convert and transfer TV shows directly to your mobile device. Watch TV on your iPod, Sony Playstation Portable, Laptop, Pocket PC, Smartphone etc. Transfer directly to your device using your remote control (connectivity hardware may be required).

Lifextender
Lifextender is a simple commercial-removal application designed exclusively for Windows Vista® Media Center users.

ShowAnalyzer
ShowAnalyzer is another commercial removal based plug-in that basically “watches” the show for you, only really, really fast.

MCE Auction
Just imagine sitting on your couch in the living room with your remote in the hand while you search, browse, bid or buy on eBay! mceAuction brings eBay to your living room on your Microsoft® Windows® Media Center 2005 or Window’s Vista® Media Center.

MCE Contacts (Fee based)
Brings your contacts into media center with the ability to add pictures and detailed info on each contact.

Media Center Mail
With Media Center Mail you can read your e-mails on your Media Center TV. Media Center Mail comes with its own mail system for receiving e-mails from POP3 servers.

Media Center Status
Media Center Status is a simple application to keep your Facebook and Twitter friends up to date based upon what you are watching in Media Center.

MCE Phone Skype Application (Fee based)
With mcePhone for Skype, your Microsoft® Windows® Media Center turns into a full communication machine. Make/Receive Skype calls from within Windows Media Center (additional hardware may be required).

Menu Mender
Not so much a plug in per se, but more of a nice utility that allows you to customize the menu strips in Windows Vista® Media Center, add short cut icons to launch applications, etc.  This does not work with Windows 7®.

Media Center Studio
Media Center studio is the follow on product to Menu Mender.  It is another nice utility that allows you to customize the menu strips, add themes and customize your Media Center experience in both Windows Vista® and Windows 7®.

MCE Zone
A site with several different plug in applicaitons. They have calendar plug ins, Twitter® plug ins, VOIP plug ins and more.
 
As you can see, there are lots of ways to extend the functionality and enhance your HTPC experience.  Next time, I will provide more info on my own experience with our Maui HTPC.

Till next time, Happy Trails!

Jay Taylor is a Senior Developer Relations Engineer at AMD. His postings are his own opinions and may not represent AMD’s positions, strategies or opinions. Links to third party sites are provided for convenience and unless explicitly stated, AMD is not responsible for the contents of such linked sites and no endorsement is implied.

In previous segments we have discussed some of the functions and features of the HTPC. We have shown you the very cool MSI Media Live Diva platform. We have even shown you where you can buy your own system. This time let’s spend a little time on how the hardware industry as a whole is addressing the needs of the HTPC.

Until recently, the HTPC space has been dominated by the “Garage Shop Guy”. By this I mean, the technically skilled enthusiast type person that thrives on building and tweaking their own computer hardware. Building an HTPC required patience and time along with core knowledge of PC hardware. There has been a fair amount of fine tuning the hardware and software to get just the right functionality and performance out of the system. This put the HTPC outside the realm of the mainstream consumer. However, with advancements in technology and greater levels of integration, it is much easier to build a compelling system without the time commitments and tuning previously required. In future segments, I will do a deeper dive on many of the individual topics in this blog, but for now I want to provide a little overview on technology changes.

Improved Video Processing
Prior to HDTV, PCs displayed on standard definition televisions (SDTV) were never that compelling. Resolution capabilities of SD sets were just too low to properly display digital content. However, with the growth of HD TV sets and advances in video processing technology, chipsets are offering better performance and more functionality than previous generation products. Things like hardware acceleration to improve video playback, improved connectivity options via HDMI outputs, and Microsoft’s DirectX® 10 support for better 3D processing have all come together to make the HTPC not only easier to build, but also cheaper since a discrete GPU card is no longer required for many HTPC applications. What this can mean to the consumer is a lower overall cost, low heat, low noise, but with full, Hi-Def playback of your favorite content on your HD TV or monitor. However, many of these chipsets also support a hybrid mode that allows for a discrete card to be used in conjunction with the integrated GPU. This provides more horsepower for more GPU intensive applications like gaming and more.

Improved Audio Processing
Along with improved video performance, vendors are trying to address the audio performance requirements. Watching a beautiful, high definition movie with flat or distorted audio tracks is just not all that interesting. Listening to it through your TV speakers is not all that exciting either. To address this, vendors are moving to support more advanced audio features. This in turn will lead to a much more compelling experience when watching movies or listening to music. One platform that really targets this experience is the MSI Media Live Diva platform covered earlier. As mentioned, AMD, MSI and D2Audio got together to try and deliver a platform that uniquely targets the HTPC market needs.

Improved Chassis Designs
Early HTPC chassis were based upon standard desktop PC chassis designs. They were very big and frequently very loud. They had high RPM fans spinning at full speed that often exceeded 34+dBs. This created very loud system level noise and was very annoying when one could not hear the subtle dialog over the loud fan noise. Furthermore, they still looked very much like a black painted PC chassis that had just fallen over. Aesthetically, these PCs just did not fit into the look/feel of the rest of the Audio/Video components. Today, you can find numerous chassis from different vendors like Antec, nMedia PC, Lian Li, Silverstone, Thermaltake and others making chassis in different shapes, sizes and looks.  The chassis are designed to look/feel much more like audio/video equipment than a traditional PC look/feel. Chassis vendors have spent a great deal of time trying to improve the overall design and airflow of these chassis solutions while improving the functionality. Many have LCD displays or VFD (vacuum fluorescent displays) to show information much like a DVD player or AVR. Some have volume knobs and front panel controls. Others are more simplistic in design for a very Spartan feel. The benefit to the consumer is that they now have much more choice and price points when selecting a unit.  I have a future blog planned to discuss this further, stay tuned for that one.

Improved Thermal Designs
As stated earlier, many of the older technologies were just adaptations from the traditional desktop PC. Noise levels in the desktop context were never a big issue since most desktops sat underneath a desk and quiet systems were merely an afterthought. However, in a living room, you want to hear the dialog when watching movie, hear the subtle details of your music. Audio is fairly important in this space. You really don’t want to hear the loud CPU fan whirring away while trying to enjoy your content. Therefore, cooler manufacturers have worked hard to find more effective ways to properly cool the components in the system without spinning fans at 5K RPMs. There are many innovators working on improving technology in this area. For example, Noiselimit Noiselimit has developed a cooling technology that uses a “bubble pump” technology that allows the use of a low spinning fan (1900 RPMs), yet keeps the process very cool.  There are many others that offer solutions for this space as well.

Improved HDD technology.
Hard Disc Drive (HDD) vendors are also addressing the needs of this market segment. Vendors such as Seagate, Hitachi, and Western Digital offer a line of drives that specifically target the HTPC segment and incorporate technology like fluid bearings, improved streaming, low noise operation, and more, to bring lower power and quieter operating drives for the system. The HTPC does not need super fast drives that are constantly grinding away crunching data. This type of computer setup requires drives that are quiet and have spin rates designed to handle the streaming needs of entertainment content. They also need to operate efficiently in smaller enclosures with less airflow. Therefore, these industry giants have been working on technology to address these operating parameters. As such, these hard drive vendors have launched new products in the recent past that target the set-top box and HTPC markets.

The list of hardware changes can go on and on — graphics cards, optical drives, improved drivers and endless variety of software applications. One could blog endlessly on any one of these industry changes, let alone rambling on in a single post. Therefore, I will try to focus upcoming blogs on some of these pieces of technology, show you various options for components, and explain how it all comes together.

So, what are future hardware topics you would like to see covered?

Till next time, Happy Trails!

Jay Taylor is a Senior Developer Relations Engineer at AMD. His postings are his own opinions and may not represent AMD’s positions, strategies or opinions. Links to third party sites are provided for convenience and unless explicitly stated, AMD is not responsible for the contents of such linked sites and no endorsement is implied.

In my personal life I consume media in many ways. My primary tool is my AMD LIVE! Media Center PC with Microsoft Vista Home Premium. It is in my bedroom and very integrated into my routine, and I use it heavily. In the morning I watch The Today Show while I get ready for work. When I get home from work I catch up on shows I missed that are pre-recorded. At night my wife and I watch Family Guy as we wind down and head to bed. When we go to parties and take pictures, the first thing I do when we get home is stick the camera’s SD card into the Media Center and copy the photos to the hard drive.

There are several areas that still need improvement. It is still a computer, so a wireless keyboard and mouse is a must. While the integration needs a lot of work, I do love being able to stream video from Hulu, Netflix, and YouTube onto a large screen TV.

Being able to use all the online streaming services without special support is great. Upgradability is also a plus. With all the HD content I’ve been recording, I had to upgrade the hard drive twice. There are still several more ways I plan on using my Media Center. In the near future I want to get either a Pica extender or a Microsoft Xbox 360 to view my content outside of the bedroom. I also want to get a SideShow device to have a more interactive experience with my computer.

I feel like I live two years in the future, because I am not a typical user. But I’m sure in two years everyone will have a computer hooked up to their TV. It might not be in the same form and I’m hopeful the setup will be more polished. I know I didn’t include Blu-ray in my setup, but once again that ties back to the great upgradability of a PC platform. PCs are the best kept secret in home entertainment.

1. THIS UTILITY MAY DISABLE SECURITY / ANTIVIRUS SOFTWARE, OR ADVERSELY AFFECT YOUR SYSTEM. REVIEW ACCOMPANYING DOCUMENTATION CAREFULLY BEFORE INSTALLING.

Wesley Faulkner

Wesley Faulkner is a Product Development Engineer at AMD. His postings are his own opinions and may not represent AMD’s positions, strategies or opinions. Links to third party sites are provided for convenience and unless explicitly stated, AMD is not responsible for the contents of such linked sites and no endorsement is implied.

Show me the content!

For those that have been following this blog, you have heard me share thoughts on the value of the Home Theater PC and all the great things it can do. I have talked about the MSI 7411 platform (a.k.a. “Maui”) and the unique features it offers to this space. I have even dropped a few hints about all this wonderful content that exists online. But where do you find it?

Well, today I thought I would share info and links to some of the content that exists online. Some content is in high definition (HD)* while some is standard definition (SD) and in many cases, you can find full length episodes of your favorite TV content. You can even find older syndicated shows that may not be available from broadcasters in your area or on any station today. Whether you are looking for reruns of Star Trek from the 1960’s, cop shows from the 1980’s (TJ Hooker anyone?) or (sticking with the William Shatner theme) the latest episode of Boston Legal, you can probably find just about all of it online.

This is not to say that every episode of every show is available, but there is a very, very large amount of content to be found with just a little bit of effort. Much of it is free or ad revenue supported. In addition to this ad revenue-supported content, there are also subscription services where you can access even more content and services.

This list is not all-inclusive by any means and is somewhat regional in nature due to my location here in the U.S. For those folks in other regions, make a comment on this blog post with your favorite content providers and we will add to this list.

What I am hoping to show here is just how much content can be found with minimal effort. After all, it is content that we are all ultimately interested in and what helps make the HTPC a valuable part of your entertainment system.

Most of what I have discussed previously involved a remote controlled interface through Windows® Media Center. When you add a keyboard, mouse, and an Internet connection to your HTPC, you increase the amount of content available to your HTPC. It is important to note that broadband Internet connections are very helpful for viewing online content. Most of the links to content below are found through ordinary web searches using your preferred browser software.

Now, enough talk, on with the list:

So, as you can see, there is a whole world of content out there to be enjoyed on an HTPC. Stay tuned for the next update, where I will discuss where you can get your own HTPC.

*HD monitor or TV required to view HD content

Till next time, happy trails!

Perhaps by now, the idea of an HTPC has caught your eye – but what is AMD doing to help things along? This is a fun topic for me, one of my key roles here at AMD is to help define and enable cool new platforms. I get to work with both AMD customers to understand their needs and key AMD partners/industry leaders to enable those new platforms. One of the more recent projects I have worked on is our AMD LIVE! Home Cinema platform, affectionately known as “Maui”.

With this Maui platform, I had the pleasure of working with Intersil’s D2Audio team and MSI to define a unique platform that targets the HTPC space. The goal here was to develop a specification for a platform that focused on the needs of the HTPC space. We wanted to define a platform that would not only deliver an outstanding HD experience, but make it easy to set up and use.

Maui, in reality is the specification MSI used to develop their MSI Media Live Diva platform. What is unique about this platform is that it was purpose built for a specific application.

At the heart of the MSI Media Live Diva platform is our own AMD RS780M chipset. This chipset is a great solution for playing back HD Video content. I am not saying that just because I work here, but because the 780 family chipset supports full HD resolutions including 1080p, 1080i and 720p. It is capable of playing back Blu Ray discs, stutter free. You can even play DirectX 10-level games. To further enhance the video capabilities of this platform, MSI added 128MB of dedicated sideport memory. If you want, here is more information on the 780 series of AMD chipsets.

Now, I know some people are probably thinking, “So, it has great video capabilities, there are other platforms that do that as well.” While this is true, there is more to this platform that just great video…it also has great audio. This is not your typical PC level audio, I am talking about true, AVR class audio. Furthermore, the audio is scalable to meet your needs. MSI offers both a 5-channel amplifier version and/or a 7-channel pre-amplifier version.

5.1 Channel x 100W Amplified Card (MS-4140)

7.1 Channel Pre-Amplifier Card (MS4141)

Yep, that’s right, true AVR class audio in either an amplified or pre amplified format!

So let’s talk about that for a moment. Key factors in overall audio quality are Signal to Noise ratio (SNR) and Total Harmonic Distortion (THD). The higher the SNR and the lower the THD, the better the audio will sound at both low and high volumes (not that any of us listen to our music loud or anything). The audio capabilities of this system are much better than typical PC audio solutions and on par with mainstream AVRs from leading consumer electronics vendors, and I’m not just talking about the low-end AVRs, but their more expensive brothers.

The 5 channel amp card (yes, that is really an amplifier) has a SNR > 105dB and a THD+N factor of < 0.1%. This allows you to connect up to your home stereo speakers directly without needing an expensive amplifier just to get good audio.

Now, that is great if you don’t have a nice amp, but what about the person that has already invested $$ in a nice amplifier? Well, the 7 channel pre amp card has an SNR > 112dB and THD+N factor of < 0.01%. It is capable of driving a very high quality audio signal directly to your amplifier via the multichannel inputs on your AVR.

What about ease of use?

Previously, most HTPC products were based upon traditional, off the shelf PC motherboards. While this is generally not an issue, many of these PC motherboards have legacy PC connections that are just not useful in an HTPC environment. For example, most boards still have PS-2 Keyboard and Mouse connections, some have serial ports and/or parallel printer ports. Many still use 3.5mm audio jacks for their audio connections. These connectors add little value in the Audio/Video (AV) centric environment, which is where the HTPC sits. Now, legacy PC motherboards have gotten a little better over time, they are still not always easy to integrate into your home entertainment stack.

The MSI Media Live Diva on the other hand, has a much more AV centric design. Looking at the back panel for example, you will notice that those legacy PC connections have been replaced by more AV centric connections.

For video connectivity, you have Component Video, VGA and HDMI allowing for connectivity to just about any HDTV screen. For audio, as mentioned, you can drive directly to your speakers or connect to an AVR using standard, RCA cables. No need to find special adapters or expensive cables to try and connect to your other equipment.

Here are just a few thoughts from both reviewers and customers on this platform:

“Overall, I can definitely recommend this platform as Windows Vista media PC platform. It will blow away almost anything else except for perhaps custom gaming machines, and it will be easier to use than most alternatives…Sound quality with this amplifier and motherboard are top notch.” – William Wong, Electronic Design

“For under $1000, System Builders should be able to put together a system that accomplishes everything the AMD Maui PC can do and then some. The platform proves to be an excellent path to a dual purpose system, which could wind up in living rooms and conference rooms alike.” – Frank Ohlhorst, Channel Insider

“Just wanted to pop my head in and say I’ve heard this setup at D2Audio’s offices with some high-end speakers…Absolutely beautiful sound, even at high volumes. And if you want to know my reference, it’s a pair of DT BP 2002s hooked to an Integra 5.9.” – Chris Morley, Morley Digital

“I just built a system with the 5.1 amp card, it will be replacing my Panasonic XR57. I’m still playing around with it, but so far it’s at least equal to the performance of that unit…What really surprised me is how dead quiet this thing is with no signal playing, no hiss, pops, crackles, nothing. Would have never thought this was possible within the confines of a PC.” – Nick Billeci

“I am very excited about this build, it is currently slated to replace the following components
 Integra DTR 7.4 $1200
Toshiba HDA30 HDDVD player $250
Sony BDP300 Bluray $400
Pretty impressive that a sub 200 dollar mobo and amp card can deliver performance rivaling that of the components listed… I am thrilled so far with the results.” – Mark G.

“My initial impression on the quality is “absolutely phenomenal”, both audio and video. This was definitely worth the wait. In fact, I am ordering another one next week.” – William H.

These are just a few of the reviews and comments we have received about this platform, I have personally received similar comments from other reviewer and customers from around the globe. Therefore, as you can see, the MSI Media Live Diva platform really was designed to bring you a powerful HD audio and video experience. If you are interested in getting your hands on one of these platforms, check with your preferred online or local retailer or your preferred system integrator. In fact, next time we will talk more on this topic and discuss the pros/cons of building vs. buying an HTPC.

Till next time, Happy Trails!
Jay Taylor is a Senior Developer Relations Engineer at AMD. His postings are his own opinions and may not represent AMD’s positions, strategies or opinions. Links to third party sites are provided for convenience and unless explicitly stated, AMD is not responsible for the contents of such linked sites and no endorsement is implied.